2020LC Simplicity Lawn Mower - Parts

Seal oil

This OEM valve stem regulates air flow in and out of tires, allowing for inflation and deflation. It features an 11.5mm outer diameter, 31.75mm total length, and 22.35mm effective length. It is a metal valve with a threaded plastic cap, housed in plastic. To determine if a valve stem is broken, you can check for signs of damage or leakage...Read more. Signs of a broken valve stem include cracks, bends, or air leakage, which should be replaced to prevent tire deflation and operational issues. To remove the valve stem, fully deflate the tire first. Then, disconnect the tire from the rim to access the inner part of the rim. You may need to unthread any securing nuts if present. Use a pair of pliers to grip at the base of the valve stem and then unscrew it from the rim hole.

Ring ret ext #98 0.9

Filter-Oil

This is an authentic Simplicity replacement part. The bearing shield is designed by the manufacturer for use in lawn tractors. This part is made of metal, and is used in the assembly that connects the mower blade to the base of the mower deck. It helps to protect the bearing from the motion of the blade. You will require a wrench when replacing this part. This item is sold individually.

Set screw

Rod-.283dia 11.65lg d

It is a high-quality replacement for a faulty, a damaged or a missing switch-rocker that was installed on a new unit. It is the switch which allows a user to adjust the cutting height. Unfortunately, over time parts can wear out or get damaged eventually requiring a replacement. Make sure to check the appropriate diagrams for your model t...Read moreo ensure the correct repair procedure. Please note, this high-quality switch is sold as an individual item. It is a genuine manufacturer-sourced part which is specially designed for Murray, Snapper and Simplicity lawn mowers.

This is a genuine replacement part sourced from the original manufacturer for use with lawnmowers. The metal washer is commonly used to disperse pressure put on a part assembly by a nut or bolt across a wider surface area. This washer is used with several different models of lawnmowers, and the application of the washer can vary based on the model of mower.

The washer shim goes between the blade adapter and the shield-bearing. It is available individually and is made of metal. This part is an OEM from Murray, Snapper, and Simplicity for use in lawn mowers and lawn tractors. It might require a wrench to replace this part if it becomes bent or broken.

This is a genuine replacement part sourced from the original manufacturer for use with riding lawnmowers. The special nut is commonly used to secure the steering wheel to the steering shaft. This nut is available as an individual replacement part, please see model diagram for associative parts.