2019 - Parts

This is a genuine OEM replacement part, it is sold individually. A carburetor basically consists of an open pipe through which the air passes into the inlet manifold of the engine. The pipe is in the form of a Venturi: it narrows in section and then widens again, causing the airflow to increase in speed in the narrowest part. Below the...Read more Venturi is a butterfly valve called the throttle valve ' a rotating disc that can be turned end-on to the airflow, so as to hardly restrict the flow at all, or can be rotated so that it (almost) completely blocks the flow of air. This valve controls the flow of air through the carburetor throat and thus the quantity of air/fuel mixture the system will deliver, thereby regulating engine power and speed. The throttle is connected, usually through a cable or a mechanical linkage of rods and joints. Fuel is introduced into the air stream through small holes at the narrowest part of the Venturi and at other places where pressure will be lowered when not running on full throttle.

It is a genuine OEM replacement part that is specially manufactured for use with toro and Lawn Boy walk-behind lawn mowers. This discharge door assembly is mounted on the side of the lawn mower deck to prevent the grass from shooting out. It is used to keep the grass under the deck either for mulching or bagging depending on your set up. ...Read moreIt is a complete assembly which includes the durable plastic door and the metal hinge mechanism that is used to secure it to the deck.

This is a genuine Toro part which is sourced directly from the original manufacturer for use with riding lawn mowers and garden tractors. The screw-shoulder helps to secure the bracket-idler. If the threads are stripped or the hardware is missing, this will provide an identical replacement. Keep in mind this high-quality screw is made of ...Read moredurable metal and is sold individually. You will need a wrench to secure or remove it. Make sure to refer to the appropriate diagrams of your model for the exact location and the correct application.

This governor spring regulates the engine speed in your lawn equipment. It works in conjunction with the governor mechanism to control the throttle and prevent the engine from over-revving or running at an excessively low speed. It is commonly found near the throttle assembly. Keep an eye out for signs of wear, damage, or stretching in th...Read moree spring. If it appears weak, worn, or if you notice engine surging or difficulty maintaining a steady speed, it may indicate a broken governor spring. Before replacing the spring, ensure the engine has cooled down. Remove the wire and boot from the spark plug and turn off the fuel valve. To replace the governor spring, unhook both ends of the old spring while taking note of the connection points. Install the new spring by hooking one end onto the governor lever and the other end onto the control bracket assembly. Once securely attached, turn the fuel valve back on and reattach the spark plug wire and boot. This replacement part is sourced directly from its original equipment manufacturer.

This special screw is generally used to secure the transmission bracket, for correct application please make sure to check appropriate diagrams of your model. It is high quality hardware that is specially manufacturer for use with Toro and Lawn Boy lawn mowers. Please note this durable metal plastite screw is sold individually.

This item is an authentic Honda replacement part and has been sourced from the original manufacturer to be used with small engines. The seal is used to prevent oil from leaking from between the crankcase and the crankshaft. The oil seal is available as an individual replacement part.

This is the height adjustment know that is secured to the metal arm that allows user to adjust the cutting height of the mower. It is a high quality replacement part that is specially manufactured for use on Toro walk-behind lawn mowers. Please note this durable plastic knob is sold individual.

This is an authentic item that is supplied by the original equipment manufacturer for use with Toro lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this i...Read moretem. Keep in mind this high-quality nut is made of durable metal and is sold individually.

This is a genuine OEM sourced hardware that is specifically made for use with Toro lawn and garden equipment. It is a standard hardware which may have multiple applications depending on the model of your unit. Please make sure to refer to the appropriate diagrams for the correct location and application of this part. Keep in mind this hig...Read moreh-quality flange nut is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is an authentic OEM sourced part which is specially made for use with Toro snowthrowers. It is an identical replacement for a missing or a faulty retaining ring that was installed on a new unit. The purpose of this part is to secure a component on a shaft, please make sure to refer to the appropriate diagrams of your model for the co...Read morerrect location and application of this hardware. Keep in mind this high-quality part is made of durable metal and is sold individually.