20060 - Parts

The metal pinion is an authentic Toro part that has been sourced from the original manufacturer to be used with lawnmowers. This item attaches to the transmission axle and interconnects with the drive wheel gear to rotate the wheel in unison with the shaft. The pinion gear is available as an individual replacement part.

This screw is an authentic OEM sourced hardware, it is not an aftermarket imitation. It is commonly utilized on Toro snow throwers. It is a standard hardware which has multiple uses depending on your unit, please make sure to check appropriate diagrams for correct location and use of this hardware. One hex head screw is included per order.

It is an authentic Toro hardware. The thrust washer is supplied from the original equipment manufacturer for use on lawn mowers. It is utilized to provide a tight fit between connected components of the drive wheel mechanism. Unfortunately, over time the material will tend to wear out and the may get damaged eventually requiring a replace...Read morement. To ensure the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable metal thrust washer is included. You will need a wrench set to remove the wheel when replacing this hardware.

This friction ring is an authentic item which is supplied by the original manufacturer for Toro lawn mowers. It is one of the special parts that helps to provide a tight seal between components. Over time it may wear out, get damaged or simply lost eventually requiring a replacement. This high-quality friction ring is made of a durable ma...Read moreterial and is sold as an individual component. Note, you may need a wrench set to remove and resecure the hardware that holds this part. Check the diagrams of your specific model for the exact location and the correct application of this hardware.

This is a genuine replacement part manufactured for use with outdoor power equipment. This flanged hex head screw has several applications, please see model diagram for part use and location. This screw is available as an individual replacement part.

It is an authentic Toro hardware. The washer-clutch is supplied from the original equipment manufacturer for use on lawn mowers. It helps to engage the pinion gear which is an important component that drives the wheel assembly. If the motor runs but the drive wheel is not spinning, a broken or worn washer-clutch may be the reason. To ensu...Read morere the exact location and the correct application of this item, refer to the appropriate diagrams of your model. Note, one durable plastic washer-clutch is included. You will need a wrench set to remove and resecure the wheel when replacing this hardware.

The Handle (or Knob Handle) is a black, plastic part which is rated as "Easy" to install by customers. It attaches onto the handle, so you can quickly release to fold down the handle bar. If the part is visibly broken (due to wear/fatigue), it should be replaced. Refer to your make, model and diagram to check if this is the right part for you.

This genuine replacement part is supplied from original equipment manufacturer. It is a commonly used item on Toro lawn mowers. The purpose of this shoulder bolt is to secure a wheel to the axle. This bolt has a hex head which requires a wrench to secure. Includes one (1) bolt per order.

This is an authentic Toro replacement part that has been sourced from the original manufacturer to be used with walk-behind lawnmowers. The plastic pivot stop attaches to the upper handle and is used prevent the control bail from pivoting too far and breaking the cable. This item is available as an individual replacement part.

This black OEM fuel cap (1-1/2 ID) is a black plastic cap which attaches to the fuel tank to keep fuel in and keep debris out. If the cap becomes broken due to wear/damage/fatigue there may be a fuel leak, and the part should be replaced. Refer to your make, model and diagrams to ensure this cap is right for you.

This is an authentic OEM sourced part that is intended to be used with walk-behind lawnmowers from Toro and Lawn Boy. The wheel interconnects with the transaxle's pinion gear and is used to drive the mower when using the self-propel feature. This item is available as an individual replacement part.