2003 - Parts

This is a genuine replacement part that is manufactured for use with lawnmowers. Lawnmower blades can wear out over time and although they can be sharpened they may need to be replaced eventually. This blade is ready to be installed and is sold individually.

This is an original replacement part manufactured for use with walk-behind lawnmowers. The mount bushing is used to provide spacing for the bolt that mounts the pivot arm and arm spring to the height adjustment plate just inside the front wheels. This bushing is available as an individual replacement part, please see model diagram for associative parts.

This is a genuine replacement part manufactured for use with small engines. The special flywheel key fits into the slot on the crankshaft and aligns with the keyway in the center of the flywheel. This flywheel key allows the flywheel and crankshaft to maintain the same rate of rotation, and if the key should break it can cause misfires or poor engine performance. This flywheel key is sold individually.

This is an authentic manufacturer-sourced component which is specially made for use with Toro lawn mowers. It is an identical replacement for a missing or a faulty pivot arm assembly that was installed on a new unit. The part is secured on the shaft helping to hold the wheel. Please make sure to refer to the appropriate diagrams of your m...Read moreodel for the correct location and application of this pivot arm. Keep in mind this high-quality assembly is made of durable metal and is sold individually.

This is an original Toro replacement part. The breather passage gasket is designed by the manufacturer for use in lawn mowers, engines, motors, and generators. This part is made of flexible plastic, and is used to seal the connection between the breather passage cover and the cylinder. You will require a screwdriver or wrench when replacing this item. This product is sold individually.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to secure the muffler deflector or to secure the starter clutch to the flywheel. This item is available as an individual replacement part.

This is a Tecumseh and Toro replacement part directly sourced from the manufacturer for use in lawn mowers. The air cleaner collar attaches to the air cleaner gasket. It might require a screwdriver to replace this item. It will need to be replaced if it breaks. This part is sold individually and is made of plastic.

The cylinder head attaches to the cylinder head gasket. It is an authentic replacement part directly sourced from the manufacturer for use in Briggs & Stratton engines and Toro lawn mowers. This item is available individually. A wrench might be needed during the installation process. This part may become broken and will need to be replaced.

This replacement cutout cover is a genuine OEM sourced item that is designed for use on Toro lawn mowers. It is mounted over the opening on the deck to prevent grass clippings from shooting out of the top. This part is made from durable plastic and it is sold individually. Please note the hardware to secure this part is sold separately.

This authentic replacement part is supplied by original equipment manufacturer for use on Toro walk-behind lawn mowers. The cable-brake stops the blade when the control handle is released. If the cable is broken it will cause the brake to not release even when the lever is pressed. Note, this high-quality rubber insulated component is sol...Read mored individually. Refer to the owner's manual of your model for the correct application of this part. Replacing it is a simple task that should only require a screwdriver and pliers.