My Orders
- Home
- 1988121847
- Instructions
1988121847 Kenmore Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
fans and lights worked in refrigerator but not cooling
9 of 23 people
found this instruction helpful.
-
James from Blue Springs, MO
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
By going on line and going to PartsSelect, the check out procedures traced the problem to the start/overload relay. Using a nut driver, I removed the back panel and using their instruction, I installed the overload relay. On the next to the last step on the instruction, the sealer in the kit was already hardened. I called the service
... Read more
hot line at PartsSelect and they apologized and sent me another kit to finish the repair. In two days, the new kit came and the repair was complete. The whole experience with PartsSelect was great.
Read less
Was this helpful?
Thank you for voting!
freezer quit working
1 person
found this instruction helpful.
-
Anthony from CIRCLEVILLE, OH
- Really Easy
- Less than 15 mins
-
Pliers
replaced relay switch
when I finally got started to do the repair it took 15 minutes my biggest delay was no instructions were sent with the part and it took time to get some
when I finally got started to do the repair it took 15 minutes my biggest delay was no instructions were sent with the part and it took time to get some
Was this helpful?
Thank you for voting!