My Orders
- Home
- 1988101583
- Instructions
1988101583 Kenmore Freezer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
fans and lights worked in refrigerator but not cooling
9 of 23 people
found this instruction helpful.
-
James from Blue Springs, MO
- Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
By going on line and going to PartsSelect, the check out procedures traced the problem to the start/overload relay. Using a nut driver, I removed the back panel and using their instruction, I installed the overload relay. On the next to the last step on the instruction, the sealer in the kit was already hardened. I called the service
... Read more
hot line at PartsSelect and they apologized and sent me another kit to finish the repair. In two days, the new kit came and the repair was complete. The whole experience with PartsSelect was great.
Read less
Was this helpful?
Thank you for voting!
No part
1 person
found this instruction helpful.
-
Abby from RALEIGH, NC
- Very Difficult
- More than 2 hours
Never received the part.
After 30 days I did receive a full refund.
However, that was one month of confused communication and wasted time not being able to use my freezer.
Not a happy experience.
After 30 days I did receive a full refund.
However, that was one month of confused communication and wasted time not being able to use my freezer.
Not a happy experience.
Was this helpful?
Thank you for voting!