190-620 (2002) MTD Lawn Tractor Accessories - Parts

This carriage bolt measures 5/16-18 x .75 and fastens two parts in your machine together. It has a round domed head and a square underside so the bolt does not rotate once it has been secured into place. If it has signs of deformation or wear, you will need to replace it. To unthread this bolt, you need an adjustable wrench to loosen the ...Read morenut found on the end of the bolt. You may need to apply a lubricating oil to the bolt if it is stuck. You may need to clamp down on the head of the bolt with pliers while continuing to turn the nut counterclockwise. You can then slide the carriage bolt out of its hole or tap it gently with a hammer. This bolt is a standalone product and the nut is not included. This bolt was sourced directly from its manufacturer.

This is a genuine OEM sourced part which is specially designed for use with lawn and garden equipment. It is an identical replacement for a missing or a faulty bolt that was installed on a new unit. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind t...Read morehis high-quality hex bolt is made of durable metal and is sold individually. Note, you will need a wrench to secure or remove it.

This is a genuine item that is supplied by the original equipment manufacturer for use with MTD and Ryobi lawn and garden equipment. It is a standard hardware which has multiple applications, please make sure to refer to the diagrams of your model for the correct location and application of this item. Keep in mind it is made of durable metal and is sold individually.

This OEM Hex Nut is a gold colored, metal, 3/8 x 16 part, sold individually. It is installed with a wrench, or socket and torque wrench, by torquing to the manufacturer specfications, and is used to secure parts in place. You will know it is broken when you see the nut has damaged threads or rounded off edges, which can happen due to fa...Read moretgiue. If it is damaged, it should be replaced. This part can have different uses and different degrees of difficulty depending on the part the hex nut is securing, but generally the replacement of this part is an easy job.

This is an authentic replacement part sourced directly from the manufacturer. The flat washer is commonly found in yard equipment from MTD and Ryobi, such as snow throwers, lawn tractors, tillers, and blowers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that ther...Read moree are different washers used in the machine. Refer to the parts diagram to be sure of ordering the correct part. You may require a screwdriver or wrench when replacing this item. The flat washer is available as an individual replacement part. Please note that in some of these models, the flat washer is secured with a push nut. Most push nuts are not reusable and will need to be replaced every time they are removed. If your model makes use of a push nut, you may want to purchase both parts at the same time.

This is a genuine replacement part sourced from the original manufacturer for use with lawn tractors made by MTD, Murray, Troy-Bilt and Tecumseh. This part connects underneath the snow blade and uplifts the blade. It is recommended to replace one and the other at the same time to prevent uneven wear. This part is sold individually and made of metal.