1882 - Parts

This ribbed-neck stud in your lawn equipment is a threaded bolt that attaches to the wheel hub. It may also be referred to as a wheel stud. It secures the wheel to the hub and has a 7/16-inch diameter, a 14 threads per inch pitch, and a length of 1.6 inches. If the wheel feels loose or wobbles, the stud may be broken or damaged. Look for ...Read morevisible cracks, bends, or breaks in the stud. A broken stud can cause wheel misalignment or detachment and additional stress on the wheel assembly. To remove the stud, turn off the equipment, engage the safety mechanisms, and use a jack to elevate the equipment. Remove the wheel by loosening and removing the nuts, then slide it off the hub. With the wheel removed, use a hammer to drive the stud out of the hub. You need to use a press to install the new stud. When replacing the studs in your machine, consult your user guide to ensure you purchase the correct number of studs as they are sold individually.

This is an OEM part sourced directly from the manufacturer. The connector is commonly found in Kohler engines. This part is made of high-quality plastic, and is attached to the rectifier regulator to direct the path of wires that carry electrical signals. You may require a wrench when replacing this item. This product is available as an individual replacement part.

This authentic manufacturer-sourced component is specially designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the diagrams for your specific model for the exact location and the correct application of this screw. Keep in ...Read moremind this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This manufacturer-certified Hex Bolt, measuring 5/16-18 x .75 inch, is a gold, metal, individually sold bolt. It can be installed using a wrench or socket and torque wrench, by tightening to manufacturer specifications. If damaged (likely due to fatigue) the threads will be stripped, or the ends rounded off. If broken or missing, it sho...Read moreuld be replaced. Refer to your owners manual or model number to ensure you are purchasing the correct part.

This is a fuel pump for various models of lawn tractors and lawn mowers, as well as other small engines. Fuel pumps are used to deliver fuel to the engine from the fuel tank and help prime the engine as well as keep the engine pressure regulated. Made of high-quality black plastic, this fuel pump has 3-line attachments for the tank, carbu...Read moreretor, and vacuum, as well as a copper-brass vent. If you notice your engine emitting unusual noises, misfiring, or having difficulty starting, this fuel pump may need to be replaced. This is an individual OEM part, meaning it does not include any other parts, such as fuel lines or clamps. Replacing this pump will require you to drain the fuel from the system before disassembling this pump, as well as a set of pliers to remove the fuel lines and clamps.

This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it is used in lawn equipment to help spread out pressure and absorb shock between parts. If a washer is broken, it may look flattened or distor...Read moreted, and your machine may make unusual vibrations or noises. If you do not replace a damaged spring bell washer, your machine will wear out faster because there will be nothing to cushion its parts. To remove a washer, you can use pliers or a flathead screwdriver to pry it from your machine. If it is difficult to remove, you can use a penetrating oil to loosen it first. To make sure you purchase the correct number of washers, which are sold separately, check your user guide to see where they are needed in your machine.

This is a genuine replacement part sourced from the original manufacturer for use with outdoor power equipment. The hex lock nut is used with several different types of equipment, and the application of the nut can vary based on the model of equipment. This hex lock nut is available as an individual replacement part, please see model diagram for part location and usage.