1855 - Parts

This is an OEM part sourced directly from the manufacturer. The cheese head screw is designed for use in Karcher pressure washers. This part is made of metal, and is generally used in securing the swash plate. Please be aware that there are different screws used in the machine. Refer to the parts diagram to be sure of ordering the cor...Read morerect part. You may require a torx screwdriver when replacing this part. This item is sold individually.

Genuine Milwaukee replacement part. This brush is sold individually, 2 are needed for the tools shown below. It is always best to replace both brushes, even if only one is worn.Worn brushes frequently are the cause behind a motor running poorly.Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a mo...Read moretor's electric braking.Carbon brushes are one of the most commonly replaced power tool parts. This is because carbon brushes are wear items, meaning that through friction and use they will gradually wear away until they need replacing. Worn brushes are a common causes of intermittent motor function, reduced electric braking and reduced motor power. A worn-out brush will often be worn down near to the wire lead and can be cracked, pitted, or burned. When replacing carbon brushes, be sure to inspect your armature for burns, cracks, or other damage which can indicate larger motor problems.

This cord protector is a genuine Milwaukee replacement part and is sold individually. Cord Protectors are designed to slide onto your cord and fit securely at the end, where it's firm rubber will protect the base of the cord from getting bent and pinched, which can expose the wires and become a safety hazard.

This is a OEM replacement part sourced from the original manufacturer for use with side discharge tractors made by Murray, Snapper and Simplicity. The user will need to replace this part if it is missing or not working correctly. This part is made of durable material and sold individually.

This 0.25-inch-diameter washer with internal lock teeth is an authentic manufacturer replacement fastener used in outdoor power equipment. It has a flanged base, which provides even load distribution and protects the mounting surface from damage during installation and removal. The washer also has inward-facing teeth, providing additional...Read more grip to prevent the secured components from falling off the equipment. Over time, the washer will corrode, crack, or wear down its teeth, leading to equipment instability, noise, and vibrations. Inspect all the washers in your equipment and replace those that are no longer functional. Use a wrench or socket to loosen and remove the old washer, and then position the new one on the mounting surface. Tighten the washer until the flange rests flush against the surface. Each washer is sold individually.

This is an OEM part sourced directly from the manufacturer. The frame bushing is designed for use in lawn tractors from Snapper and Simplicity. This part is made of metal, and is placed in the sides of the frame to allow components to move easily. You may require a wrench when replacing this part. This item is sold individually.

Hflb 1/2c x3/4 zp

This is an authentic Snapper replacement part, sourced from the original manufacturer for use with riding lawnmowers. The metal washer is commonly used to provide spacing between the top of the spindle pulley and the nut that secures it. This item is available as an individual replacement part.