My Orders
1807 - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Rear flap had deteriorated.
3 of 4 people
found this instruction helpful.
-
David from PITTSBURGH, PA
- A Bit Difficult
- 30 - 60 mins
-
Pliers
Grip each retaining clip next to the housing with large pliers. Squeeze clip completely and pull straight out. Important: Do not attempt to bend clip up or down as clip may bend and become very difficult to remove. When old flap is removed, mower edge can be cleaned and painted to avoid rust. Install new flap in same direction front/rear
... Read more
as removed flap. Reinstall clips in same direction as they were, as up and down sides are not the same.
Read less
Was this helpful?
Thank you for voting!
check valve O ring was badly deteriorated - spraying water out at O ring
2 of 6 people
found this instruction helpful.
-
bernard from INDIAN TRAIL, NC
- Easy
- 15 - 30 mins
-
Socket set
The description of the parts package on your website did not appear to be in proper (size) scale However, after following a Youtube video, I was then able to decipher what parts went where to be sure I was ordering the correct parts that I needed. Parts were shipped promptly and I found that replacing just the check valve o rings and sea
... Read more
ts, it cured the problem without having to use the other parts that came with the kit package. Would definitely order from this site again. BL NC
Read less
Was this helpful?
Thank you for voting!