1805B Makita Planer Jointer - Parts

This is a genuine Makita replacement part that includes two carbon brushes with wire leads attached. Carbon brushes are essential components in power tools and are among the most commonly replaced parts due to regular wear from friction. Over time, worn brushes can cause a motor to run poorly, operate intermittently, or lose electric brak...Read moreing power. Replacing them can often restore your tool’s performance. A worn brush may appear cracked, pitted, burned, or worn down near the wire lead. It’s always best to replace both brushes at the same time, even if only one shows signs of wear. When installing new brushes, be sure to inspect the armature for any damage such as burns or cracks, which could indicate more serious motor issues.

Genuine Makita replacement part, this item is sold individually. The purpose of the Brush Holder Cap is to retain the brush in the brush holder. This Brush Cap is used on all the Makita models listed below. It is removed by using a slotted screwdriver Do not press too hard when removing the cap they do have a tendency to break.

This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with circular saws, table saws, masonry saws, planers, demolition hammers, and angle cutters. The washer has multiple applications based on the model of the power tool. It is recommended to review your model's diagram to verify this washer's compatibility. The washer is sold individually.

Included in part number 596141-3

Genuine Makita replacement part. This phillips pan-head screw includes a washer. It is sold individually.

This is an authentic Makita replacement part that has been sourced from the original manufacturer to be used with grinders, circular saws, table saws, and miter saws. The metal screw is used with different types of machines and the application of the screw can vary based on the model of equipment. This item is available as an individual replacement part.

Genuine Makita replacement part, this item is sold individually. This screw is used on a variety of Makita tools. Use Phillips Head Screwdriver to tighten and loosen this screw. Follow appropriate safety practices when installing screw.

This is a genuine OEM replacement part manufactured for use with Makita power tools. The hexagonal nut is used with several different types of equipment and the application of the nut can vary based on the model of the power tool. This hex nut is available as an individual replacement part.

This is an authentic replacement part manufactured Makita power tools. The flat washer is commonly used to disperse pressure across a wider area on a part assembly that is applied by a nut or bolt. This flat washer is used with multiple types of power tools, please see model diagram for part location and usage. The flat washer is sold as an individual replacement part.

This is an authentic Makita replacement part. The flat washer is designed by the manufacturer for use in power tools such as chainsaws, rotary hammers, and coil nailers. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different washers used in the mach...Read moreine. Refer to the parts diagram to be sure of ordering the correct part. You may require an Allen wrench or hex key when replacing this part. This item is sold individually.