169366 Simplicity - Parts

This OEM engine screw is a genuine Briggs & Stratton replacement fastener designed for secure, vibration-resistant attachment of engine components in small gasoline engines and outdoor power equipment. Manufactured to exact factory specifications, it provides proper thread engagement and clamping force to help prevent loosening, reduce vi...Read morebration, and maintain long-term engine reliability under operating stress. Built with durable, corrosion-resistant materials for extended service life, it is an ideal replacement when original screws are missing, stripped, or worn, helping ensure safe assembly, consistent performance, and proper engine operation.

This rocker arm adjuster, or valve lash adjuster, is a genuine OEM replacement part used in lawn tractors. It is approximately one inch long and made of steel. It is responsible for adjusting the clearance between the rocker arm and valve stem, which allows the valves to open and close as needed. The adjuster will need to be replaced if t...Read morehe threads are stripped, or if it is cracked, or worn down. Remove the spark plug wire to prevent accidental starting and remove the valve cover from the engine to access the rocker arm. Detach the rocker arm and unthread the faulty adjuster. Screw the new adjuster into the rocker arm and use a feeler gauge to set the correct intake clearance. Reinstall the arm into the engine and return the valve cover to complete the repair.

This is a genuine OEM part. The Briggs & Stratton valve seal is used on many lawn tractor machines. The metal part stops oil from moving into the cylinder from the valve stem. This item is often fastened to the intake valve and the valve keeper. A screwdriver, socket set and wrench set are required for the installation. The metal valve seal is sold individually.

This authentic OEM air cleaner cartridge is made out of pleated paper with a plastic and metal case. It is commonly used item on Briggs and Stratton engines installed on lawn and garden equipment. It is designed to filter out dust and debris from contaminating engine. It is advised to periodically check your air filter and change it if it...Read more is dirty or damaged. Over time it will get clogged preventing air from entering carburetor. This will affect engines performance and could lead to more serious issues. Please note the foam filter that fits over the sides of this element is sold separately. Replacing air filter is easy and does not require any tools. • First remove the air filter cover by removing the knob • Remove old air filter • Clean out the filter base • Place new air filter in the case • Reassemble and test the engine

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

This is a genuine manufacturer-sourced part which is designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged clamp that is used to secure the hose. Keep in mind this high-quality product is made of durable metal and is sold individually. Please make sure to check the appropriate diagrams for your model for the correct location and application of this hardware.

Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.

The governor spring is made out of metal and helps to control the speed of the engine. This authentic item is supplied directly from the original equipment manufacturer for use with Briggs & Stratton generators and Toro snowthrowers, tillers, and blower-vacuums. If it becomes lost or broken it will need to be replaced. A nutdriver may be necessary to help replace this part which is sold individually.

This item has been sourced from the original manufacturer to be used with lawnmower engines from Briggs & Stratton and Toro. The o-ring is used to seal the connection between the intake manifold and the cylinder head assembly. This o-ring is available as an individual replacement part.

This replacement foam filter element is used on Briggs and Stratton engines installed on lawn and garden equipment. It is an authentic OEM sourced part, not an aftermarket equivalent. This filter adds a second layer of protection against the dust and debris. Please note, the main pleated paper filter is sold separately. No tools are nee...Read moreded to replace this filter. • Remove the cover knob • Remove the filter cover • Take out the old filter • Secure the new one • Secure the filter cover