1693405 Simplicity Lawn Tractor - Parts

This is a genuine OEM authorized replacement part which is specially designed for use with Murray, Simplicity and Snapper lawn and garden equipment. It helps to secure components together, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality ring is made of durable metal and is sold individually.

Key-ignition indak

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This genuine manufacturer-sourced item is specially made for use with Murray, Snapper and Simplicity lawn and garden equipment. It is a special hardware that helps to provide a tight fit between connected parts. This is an identical replacement for a missing or a damaged component that was installed on a new unit. Make sure to refer to th...Read moree appropriate diagrams for your model to ensure the proper repair procedure. A wrench set might be needed to replace this part. One durable bushing is included.

This is an authentic part from Simplicity for use in lawn mowers and lawn tractors. The hood spacer goes next to the screw and the hood pivot. If this item becomes broken it will need to be replaced and may require a screwdriver during the installation. This is made out of a durable material and is available as an individual replacement part.

This item has been sourced from the original manufacturer to be used with lawn tractors from Murray. The metal washer is used with different types of mowers and the application of the washer can vary based on the model of the machine. This washer is sold as an individual replacement part.

The oil filter attaches to the filter base and is made of metal. This item is available as an individual replacement part. It is an OEM from Snapper and Simplicity for use in tractors. A wrench might be needed during the installation process. It will require replacing if it becomes broken or dirty.

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This item is sourced directly from the original equipment manufacturer. It is specially designed for Snapper, Simplicity, and Murray riding lawn mowers and garden tractors. The idler pulley helps to apply tension on the belt. It is an identical replacement for a damaged or a missing component that was installed on a new unit. The pulley i...Read mores made of high-quality materials and is sold as an individual component. Check the diagrams for your model to ensure the proper repair procedure. You will need a wrench set to remove and secure the hardware.

This is a genuine Snapper replacement part, sourced directly from the manufacturer. The circuit breaker is commonly used in Snapper lawn and garden tractors. This part is made of metal with a plastic backing, and is used in the electrical system to shut down the device in case of electrical surge, protecting sensitive components. This item is sold individually.

This is a genuine OEM sourced part which is specially designed for use with Snapper and Simplicity riding lawn mowers and garden tractors. It is an identical replacement for a missing or a faulty clip, hairpin that was installed on a new unit. This is a standard hardware which may have multiple applications, please make sure to check the ...Read moreappropriate diagrams of your model for the correct location and application of this component. Keep in mind this high-quality part is made of durable metal and is sold individually.

It is a genuine manufacturer-sourced component which is specially made for use with Murray, Snapper and Simplicity riding lawn mowers and garden tractors. It is the part of the equipment that allows a user to engage and disengage the blades. Unfortunately, over time components will wear out and may begin to fail eventually requiring a rep...Read morelacement. Keep in mind this high-quality plastic body switch is sold individually. Please make sure to refer to the owners manual and the appropriate diagrams of your model for the correct location and application of this part.