1692904 Simplicity Chipper Shredder - Parts

This hex nut is a fastener made from steel and is used to secure the end of a bolt in various lawn and garden equipment and machinery. It is a genuine OEM replacement part that comes in a standard size of 5/16 of an inch with 18 threads per inch. The hex nut has a hexagonal shape, which gives it greater grip and makes it easy to tighten u...Read moresing a wrench or a set of pliers. The nut also has a flange on one end, which locks the nut in place, prevents damage to the area where it is installed, and allows the load to be evenly distributed. It is important to replace your hex nut if it is loose, cracked, or corroded. If you have not yet removed the old hex nut from your equipment you will need a socket wrench to remove it. After that, you can easily install the new nut by threading it onto a bolt or screw and then tightening it with a wrench or pliers until it is tightly secured.

Sold as a kit, including the metal body switch, a pair of keys, and the required hardware, this Ignition Switch Assembly has been sourced directly from the original manufacturer. If you are unable to start and stop your engine, you may need to replace the Ignition Switch Assembly. To complete this repair, you will need a screwdriver, a wrench set, and pliers. Customers rate this repair as Easy.

Your Samsung range is about to get a handy upgrade! Our genuine Samsung Packing Grate Assembly is not just a replacement part?it's a solution to uneven cooking and unstable pots and pans. Crafted from robust metal, this top-tier OEM component guarantees evenly distributed heat when you cook, bringing back the joy of preparing perfectly co...Read moreoked meals. What we love about this grate is its easy installation. It arrives complete with all the necessary hardware, turning what could have been a daunting task into a breeze! This is more than a part?it's a vital player in preserving your range's top-notch performance, helping your appliance continue to serve you faithfully. To ensure this grate will fit like a dream on your range, please take a little time to check if it's compatible with your specific model. Bring back the spark in your kitchen by restoring your Samsung range to its full functionality!

Key-ignition indak

It is an authentic item which is supplied directly from the original equipment manufacturer for use with Snapper and Simplicity lawn and garden equipment. The washer is generally utilized to provide a tight seal between connected pieces, please make sure to refer to the appropriate diagrams of your model for the correct location and appli...Read morecation of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is a genuine Snapper replacement part, sourced directly from the manufacturer. The circuit breaker is commonly used in Snapper lawn and garden tractors. This part is made of metal with a plastic backing, and is used in the electrical system to shut down the device in case of electrical surge, protecting sensitive components. This item is sold individually.

This is an authentic replacement part sourced directly from the manufacturer. The spacer is commonly found in Simplicity chipper/shredders. This part is made of metal, and is used to provide a sleeve for a screw in the rotor assembly. Please be aware that there are different spacers used in the machine. Refer to the parts diagram to b...Read moree sure of ordering the correct part. You will require an Allen wrench or hex key when replacing this part. This item is available as an individual replacement part.

This hex bolt is sourced from the original equipment manufacturer. The bolt is designed to fasten two individual parts together in your lawn and outdoor equipment. It is made of steel to withstand harsh environmental conditions and measures 0.25 inches in diameter and 0.62 inches in length. The hex bolt gets its name from its hexagon-shap...Read moreed head, which makes it easy to grip with a wrench or socket. Before installing the new bolt, first clean the threaded hole where the bolt rests to remove any dirt or debris in the area. Once the area is clean you can place the bolt in position using your hands and tighten it using a wrench or socket. It is important not to overtighten as this could damage the area and the bolt. Sold individually.

Hammer-j .179thk 1.25

It is an authentic OEM sourced item which is specially produced for use with snowthrowers, generators, and rear engine riders made by Murray, Briggs & Stratton, Snapper, and Simplicity. The nut is made of metal and attaches to the starter switch. During replacement, it may require a wrench to help install this part correctly. It may becom...Read moree broken or stripped and will need to be replaced. This part is available as an individual replacement.