1691413 Simplicity Snow Blower - Parts

This hex locknut has a special locking feature to prevent it from loosening due to vibrations or movement. It has a 1/4 inch diameter and a 20 threads-per-inch pitch. You will find it securing various parts of your lawn equipment, such as blade assemblies, engine mounts, or handles. A broken locknut cannot fasten components together tight...Read morely. Replace any damaged locknuts to keep your machine securely assembled and functioning properly. Loosen a locknut from your machine by turning it with a wrench or a socket. This durable metal locknut is an OEM hardware. It is sold individually, so read your user manual to determine how many you will need. Consider getting extras if you are replacing one, as these locknuts tend to wear out together.

This is a genuine OEM sourced part which is specially made for use with Snapper snowthrowers. The belt is secured on pulleys to help drive the unit. Unfortunately, over time it may wear out, begin to crack and stretch eventually requiring a replacement. Please make sure to check the diagrams for your specific model to ensure the proper re...Read morepair procedure. Keep in mind this high-quality traction belt is made of durable rubber and is sold individually.

Key-ignition indak

This is a genuine replacement part sourced from the original manufacturer for use with snowthrowers and lawnmowers. The special capscrew is used with several different models of equipment, and the application of the capscrew can vary based on the model of snowthrower or lawnmower. This capscrew is available as an individual replacement part, please see model diagram for associative parts.

This centerlock nut, also known as a flange nut or hex nut flange is a manufacturer approved replacement part. It is 5/8 of an inch with 18 threads per inch. The nut is designed to secure the bolt or screw it is positioned on and prevent it from loosening during use. It has a series of ridges on the inside that allow it to grip the thread...Read mores of the bolt or screw and a flange at its base to provide a larger surface area to clamp on. Over time the lock nut may break or become stripped. Inspect all the centerlock nuts on your equipment as you may need to order more than one for your repair. To install a new nut, use your hands to thread it on and use a pair of pliers or a wrench to tighten it until it is securely held. Be careful not to overtighten the nut as this can deform the nut and wear down the threads that keep it secure. If you experience difficulties removing or tightening the nuts, use a centerlock nut tool or a cassette lockring tool instead. Note that this nut is sold individually.

This external retaining ring is a type of fastener used to secure components in various models of tractors. It is a genuine OEM replacement part provided by the manufacturer, also known as an E-ring or circlip, which is responsible for exerting pressure against components prevent it from dislodging. The ring is a circular metal part with ...Read moreprotruding tabs or ears that can be gripped for easy removal or installation. If the retaining ring wears down or becomes damaged, it will cause the equipment parts to become unstable or fall off resulting in loss of functionality, and damage. Use retaining ring pliers to compress the ring and slide it out of its groove. Align the new ring with the groove and slide it in. Each external retaining ring is sold individually.

This is a genuine Snapper and Simplicity replacement part for use in lawn mowers, lawn tractors, and snowblowers. The key attaches to the disc and is made of metal. A set of pliers may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.

V-belt 3l 034.75 5

Used to hold a shaft with a mating part, such as a gear, this Woodruff Key is sourced directly from the original manufacturer, is made of metal, is grey, and is sold individually, not as part of a kit or assembly. When this part becomes broken or damaged, it should be replaced. You may notice the mating shaft or gear will no longer rota...Read morete together if the part is malfunctioning. Customers rated this repair as Easy.

This is an authentic Bostitch replacement part, sourced from the original manufacturer for use with pneumatic nailers. The special bumper is commonly used to stop the piston and to prevent damage to the frame. This special bumper is available as an individual replacement part, please see model diagram for associative parts.

This Simplicity Decal is made of white and blue plastic, measures approximately 11 inches x 2 inches, is not part of a kit or assembly, and is sold individually. No tools are required to complete this repair. Simply clean the area and apply the decal. Customers rate this repair as Easy.

This is a genuine part which is supplied directly from the original equipment manufacturer and is used with Craftsman lawn tractors. The idler pulley applies tension to the belt which then makes the blade to rotate. This part is made of metal and is sold individually. Before installation, disconnect the spark plug wire and make sure the i...Read moregnition key is removed. You will need a socket wrench and an open ended wrench to complete this repair.