1690673 (1979) Simplicity Snow Blower - Parts

Shear Pins are designed to break off in order to prevent further damage to your machine. Because they are designed to break, we recommend having a few spares on hand. This part is made of metal, is silver, is not part of a kit or assembly, and is sold individually. A Shear Pin will break when you hit a large chunk or ice or other debris...Read more. Once it is broken, it will need to be replaced. You will need pliers to complete this repair. Customers rate this repair as Easy.

The OEM Universal Gear attaches on the chute control rod, and meshes with the worm gear in order to adust the chute. Using the part is rated as "Medium" difficulty by customers, and requires pliers, a socket set, wrench set, drift punch and hammer. If the part breaks there may be broken or chipped teeth which will prevent it from adjustin...Read moreg the chute, and should be replaced. This part is constructed of metal and comes in gold. Refer to your make, model and diagrams to ensure this part is right for your machine.

This ball bearing is sourced from the original equipment manufacturer and can be used in a variety of outdoor equipment. It has an inner diameter of 11/16 inches. The ball bearing provides support for the rotating parts in your equipment and reduces the amount of friction they are subject to during use. If the bearing is not adequately lu...Read morebricated or has worn down, you may hear grinding or squeaking from your equipment and notice excessive vibration when in use. It is important to address this issue promptly as a faulty ball bearing can potentially damage the parts located near it. To replace the ball bearing, use a pry bar or bearing puller to pry it out of its housing. Clean the housing thoroughly and press your new ball bearing in position. Note that when pressing the ball bearing into place, apply force only to the outer portion of the bearing.

This Ball Bearing is an individually sold, silver/black, metal part. It reduces friction in the spindle assembly between the spindle shaft and the spindle housing. If broken due to wear/fatigue, you will hear a grinding, growling, rumbling or screeching sound, and should replace the part. Refer to your make, model and diagrams to ensure this is the right part for you.

Sourced directly from the original manufacturer, this Bushing is used to reduce friction on your snowblower. It is made of durable white plastic, is not part of a kit or assembly, and is sold individually. This part should be replaced if it is worn or damaged, and you may experience problems operating the chute if it is malfunctioning. ...Read moreYou will need a wrench, a socket set, and pliers to complete this repair. Customers rate this repair as Medium difficulty.

Introducing the Simplicity Friction Disc. This critical component is designed to enhance the operation of your machine by providing robust frictional grip. Composed of high-quality materials, it offers longevity and exceptional handling with the additional friction ring and wheel. The efficient design of the Simplicity Friction Disc ensur...Read morees maximum wear resistance, enhancing overall machine performance and lifespan. Get optimal performance and reliable functionality with the Simplicity Friction Disc. Reinvent your equipment's efficiency today!

This part is available as an individual replacement part. The traction belt wraps around the idler pulley. During replacement, it may require a screwdriver to help install the part correctly. It will need to be replaced if it stretches or breaks. This genuine item is supplied by the original equipment manufacturer for use with snow throwers made by Simplicity, Murray, and Snapper.

This is an OEM bushing made for use with snow blowers and snow blower tractor attachments. Made of high-quality metal, this bushing is sold as an individual part and features a 0.75-inch inner-diameter. This bushing is normally attached to the axle and chassis to reduce friction and vibrations during operation and movement of your snow bl...Read moreower. If your snow blower is experiencing suspension issues and problems with stability, the bushing may need to be replaced. Check your user manual or diagrams for the best placement and attachment.?

The Roll Pin is an individually sold, 1/8x3/4 inch, black metal pin. It's used to secure the position of two or more parts of a machine relative to each other. The part is rated as "Easy" to install and requires pliers, a hammer, and punch. If the part breaks the parts will come apart. When broken, damaged, worn or missing, the part shoul...Read mored be replaced. Refer to your make, model and diagrams to check if this is the right part for you.

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hold down that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for...Read more the correct location and application of this hardware. Keep in mind this high-quality component is made of durable black plastic and is sold individually.

This Spring is used to hold down the chute. It's rated as "Easy" to use, and requires a wrench or socket. The part comes in gold metal. If worn, damaged broken, or missing, it should be replaced. Refer to your make, model and diagrams to check if this is the correct part for you.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.