My Orders
16668-1 General Electric Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
remove and replace
10 of 24 people
found this instruction helpful.
-
Perry from Flushing, NY
- Really Easy
- Less than 15 mins
very easy remove the bad bulb install the new one
Was this helpful?
Thank you for voting!
Oven meat probe broken
3 of 3 people
found this instruction helpful.
-
robert from FAIRFIELD, OH
- Very Easy
- Less than 15 mins
This item worked as described. I paid more for this 'oem' probe than the generic 1 because i didn't want to chance it not working as others have reported.
- works great. tested it....snaps in, reads correctly, snaps out.
- works great. tested it....snaps in, reads correctly, snaps out.
Was this helpful?
Thank you for voting!
Fluorescent lamp bulb
1 person
found this instruction helpful.
-
Danial from HILLSBORO, TX
- Really Easy
- 15 - 30 mins
-
Screw drivers
Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.
Was this helpful?
Thank you for voting!
Temp probe was defective
1 person
found this instruction helpful.
-
Eric from SOUTHBURY, CT
- Very Easy
- Less than 15 mins
Threw the old one out - plugged the new one in. Steak came out just as ordered - medium rare.
Was this helpful?
Thank you for voting!
dropped & broke the oven light bulb cover
1 of 2 people
found this instruction helpful.
-
joseph from san jose, CA
- Really Easy
- Less than 15 mins
popped the new one on!
Was this helpful?
Thank you for voting!
Broken Probe Sensor
0 of 1 people
found this instruction helpful.
-
Michael from Tucson, AZ
- Really Easy
- Less than 15 mins
Replaced it
Was this helpful?
Thank you for voting!
Solenoid failed due to excessive heat.
0 of 1 people
found this instruction helpful.
-
Joseph from Martins Creek, PA
- Easy
- 30 - 60 mins
-
Nutdriver, Screw drivers
Removed back panel. Removed the defective solenoid on its bracket. Replaced it with the new door latch solenoid. This was relatively easy. Replaced the back panel. Tested self cleaning feature. Everything worked fine. I have preformed this same repair once before.
Was this helpful?
Thank you for voting!
missing meat thermistor
-
John R from Asheville, NC
- Really Easy
- Less than 15 mins
plug in thermistor when needed
Was this helpful?
Thank you for voting!
Oven Probe broke
-
Kathleen from Munt Laurel, NJ
- Really Easy
- Less than 15 mins
Ordered new probe
Was this helpful?
Thank you for voting!