16009 - Parts

It is a genuine manufacturer-supplied item that is made for Toro lawn mowers. This is a special component which helps to provide support for a wheel. Over time it may wear out, get damaged or lost eventually requiring a replacement. Check the appropriate diagrams for your model to ensure the proper repair procedure. It is made of durable metal and is sold as an individual item.

This is an authentic OEM sourced replacement part, it is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to appropriate diagrams for the correct and use of this item. T...Read morehis Torx screw is made of high-quality metal and it is sold individually, it includes one washer.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with small engines from Briggs & Stratton and Toro. The metal screw is used to secure the muffler deflector or to secure the starter clutch to the flywheel. This item is available as an individual replacement part.

This is an authentic OEM part from Briggs and Stratton and Toro for use with garden equipment engines. The stop wire connects the ignition coil to the stop switch to ground the spark voltage to the engine block when you release the bail control bar. This part is sold individually. The tool that you will need to replace the stop wire is pliers.

The screw is made of metal and attaches to the front panel. This is a genuine Toro and Lawn Boy part sourced directly from the manufacturer for use in snowblowers. Keep in mind that this item is sold individually. When replacing this part a flat head screwdriver might be required during the installation process. It might strip or break over time and will need replacing.

This is an original replacement part manufactured for use with small lawnmower engines. The pick-up tube is commonly used to pull fuel into the carburetor to mix with air to be sent into the engine's combustion chamber. This special pick-up tube is available as an individual replacement part, please see model diagram for associative parts.

This item has been sourced from the original manufacturer to ensure quality. The metal screw is intended to be used with snowthrowers from Toro and Lawn-Boy. This screw is used to secure the bearing flange to the side of the auger housing. The screw is priced as a single item.

This is genuine OEM sourced part and is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is an identical replacement for a missing or damaged spring that was originally installed on a new unit. The purpose of this hardware is to apply tension on the exhaust and intake valves. ...Read moreMake sure to refer to the owners manual and the appropriate diagrams of your model for the correct installation of this component. This high-quality spring is made of durable metal and is sold individually. To replace it, you will need to unscrew and remove the cylinder head. This will allow you to take out the valve and replace the spring.

The Pivot Washer is an individually sold metal silver washer that alows the wheel adjust to pivot on your equipment. You will be able to tell when it breaks when the your part appears damaged or jams up when adjusting, which may happen over time due to regular wear. When the part is damaged it should be replaced. The new washer will attac...Read moreh to the spring arm assembly behind the level. This is an easy repair that requires a wrench or a socket to carry out.

This is an authentic manufacturer-sourced replacement gasket which is specially designed for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It is generally utilized to provide an air-tight seal for the breather, please make sure to check the appropriate diagrams of your model for the correct applicat...Read moreion of this hardware. Over time it may wear out and begin to fail eventually requiring a replacement.