150B Husqvarna Leaf Blower / Vacuum - Parts

This clevis pin is an OEM replacement part that is compatible with various makes and models of tiller and is sold as an individual part. The purpose of this pin is to snap or break under a certain amount of pressure if your tiller is jammed, to protect the more valuable components of your tiller. Measuring at approximately 2-inches long a...Read morend made of high-quality metal, replacing this pin should only require pliers to swap out the old pin for the new.

This hairpin clip, also known as a cotter pin, is a genuine OEM sourced part used to secure rotating components together in various outdoor power equipment. It is made of steel and is approximately 1.5 inches long. The clip acts as a fastener to prevent the moving parts from loosening and falling off during usage. The clip is vulnerable t...Read moreo corrosion and general wear over time. However, it can also fail prematurely due to overloading and excessive stress. A damaged hairpin clip will result in misalignment of parts, accidental disassembly, increased friction and wear, and potential harm to the user. Remove the faulty pin and align the new one with the insertion points. Ensure that the pin is securely fitted in its appropriate slot and compress the ends to prevent it from dislodging.

The air cleaner knob, just over 1 inch in diameter, is black in color and made of plastic. It is sold individually, and its function is to tighten the air cleaner cover down on various lawn and garden equipment. This knob can become worn over time, which will cause the air filter cover not to stay in place. Most of our customers find this to be an easy repair. It does not require any special tools.

Maintain peak performance in your riding lawn mower or garden tractor with this genuine OEM replacement drive belt, engineered for select Poulan, Jonsered, and Husqvarna models. Supplied directly by the original equipment manufacturer, this high-quality belt connects to the transmission to help drive the unit efficiently and reliably. ...Read moreMeasuring 1/2 inch wide by 56-5/16 inches long, the belt is made from durable rubber designed to resist stretching and wear over time. As part of regular maintenance, replacing a worn or stretched belt ensures smooth operation and extends the life of your equipment. Installation is simple and requires only a standard wrench set. Begin by removing the mower deck and releasing the tension on the old belt. Carefully route the new belt around the pulleys according to your model’s specifications, then reattach the deck and check for proper tension before use. Sold individually, this replacement belt is a dependable solution for restoring drive performance and keeping your mower in top condition.

This is a genuine OEM replacement part used with many lawn tractor engines. The Craftsman screw (1/4-20 x 5/8) secures the cover to the riding mower deck housing. This hardened metal item is sold individually. Keep in mind three are needed for the repair, and a wrench is required for making the replacement.

Compatible with over 150 models of lawn equipment, this Spark Plug has been sourced directly from the original manufacturer. It is sold individually, made of metal and ceramic components, and is not part of a kit or assembly. The spark plug is used to ignite the air-fuel mixture inside the combustion chamber. You may need to replace the...Read more Spark Plug if your 1 cylinder engine won't start, or if your more-than-1 cylinder engine runs rough. Spark Plugs will wear over time and should be inspected regularly. Customers rate this repair as Easy.

Cotter pins are commonly utilized to secure components. It an identical replacement for a missing or a damaged part that was installed on a new unit. This authentic manufacturer-supplied cotter pin is specially made for use with Craftsman lawn and garden equipment. One durable metal part is included. Make sure to refer to the owner\'s ma...Read morenual and the appropriate diagrams for your model to ensure the proper repair procedure. You may need pliers to perform this repair.

This is an original part from Husqvarna. The hood latch is constructed of flexible plastic, and is made for use with many riding lawn mowers. This component is fastened onto the lower bagger chute, latching it to the upper chute. The hood latch is sold individually. A pair of pliers and a screwdriver may be helpful for the removal and replacement.

This swivel joint is a genuine Husqvarna replacement part that is specially designed for use with backpack blowers. It is the joint that connects on one end to the flexible hose and to the middle tube on the other end. If this part is cracked or damaged otherwise the blower will loose the airflow power requiring joint replacement. This swivel joint is made from durable black plastic and it is sold individually.

The clip attaches to the band. It is sold individually even though two may be needed. This part is an OEM from Husqvarna and Jonsered for use in backpack blowers. A screwdriver and a set of pliers might be required during the replacement of this part. This item is made out of plastic and will need to be replaced if it breaks.

This is an authentic OEM sourced replacement component which is specially produced for use with Craftsman tillers. It is the main chain that helps to drive the unit, please make sure to check the appropriate diagrams of your model for the correct location and application of this hardware. Over time the chain may wear out and stretch event...Read moreually requiring a replacement to ensure peak performance. Keep in mind this high-quality metal part is sold individually.

This is an OEM sourced replacement part used on Husqvarna backpack blowers. Its purpose is to filter out dust and debris from contaminating the carburetor and engine. When replacing the filter you can open the package it comes in and put a bit of two cycle oil in the bag and let it absorb into the filter. Then remove it from the bag and s...Read morequeeze it with a paper towel to remove the excess oil. This filter is made out of foam material and it is sold individually. No tools needed to replace this air filter. • Remove knob bolts that secure the cover • Remove cover and replace filter element • Reassemble and test the unit