Quick Question!

Have you ever purchased from PartSelect.com before?

Models > 15-187A > Instructions

15-187A Frigidaire Air Conditioner - Instructions

All installation instructions for 15-187A parts

These instructions have been submitted by other PartSelect customers and can help guide you through the air conditioner repair with useful information like difficulty of repair, length of repair, tools needed, and more.

All Instructions for the 15-187A
1-5 of 5
Search Instructions
Keep searches simple, eg. "belt" or "pump". Need help?

the selector switch knob stem broke off

  • Customer: David from Gretna, LA
  • Difficulty: Really Easy
  • Time to Complete: Less than 15 mins
  • Tools Required: Pliers, Screw drivers
  • 14 of 19 people found this instruction helpful
well i first had to removed the screws that holds the housing for the selector control switch, then i notice seven wires connected to the switch, so then i removed one to one(removed one connect one ) until i got it all done. then put it all back together, it was very easy.............

My A/C unit quit working on the hottest day of the year! I had this A/C unit for 13 years and I just knew I'd never find a fan blade for the same make and model, so I tried to go purchase a new one but couldn't find one big enough since it was so late in the season.

  • Customer: Tracy from Morgantown, WV
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Screw drivers
  • 11 of 14 people found this instruction helpful
After receiving the fan blade, I popped off the old one and put on the new one! The A/C unit worked like new once again!! It even blew colder air than before! The hardest part about the entire process was getting the13 year old fan blade off! I'd recommend your website to anyone looking for a part!
Thank you for all your help!!

Fan blade broke - it wouldn't cool

  • Customer: Bobalee from Loganville, GA
  • Difficulty: Difficult
  • Time to Complete: More than 2 hours
  • Tools Required: Pliers, Screw drivers, Socket set, Wrench set
  • 5 of 7 people found this instruction helpful
2001 Window AC/Heat Unit.
I ran across your web site and ordered the fan $70.00, telling myself that if we could fix it we saved $650.00. A new - window air conditioner is over $700.00 for heat and air.
Believe it or not the two of us oldies put it up on the desk on CARDBOARD so we wouldn't scratch the desk (my husband wouldn't have thought of that - that's why God made man -a woman). I vacuumed everything I could see to clean which made it more bearable to breathe. Then we had to decide how to get the old fan off and the new one on. They don't make these things to repair. We actually took out more screws than we needed to but that's ok. There are 3 legs in there that needed to be unscrewed so we could pull out the heating coils enough to replace the fan. One of the 3 legs was difficult to maneuver because of the tight space so my husband and his brawn decided to cut a hole in the medal on the right side. He did it a little unconventionally but it still solved the problem of the 3rd screw without affecting anything else. We both had to pull on the heating coil to slip it up out of the bottom pan without breaking anything else but we managed. We got the old fan blade off and the new one on. Two heads are always better than one. We did it and it works with a savings of $650.00.
Your website saved us a heap of money. We have already started telling others about it.

Fan blades were Broken and making loud noise

  • Customer: Eric Peterson from Blakeslee, PA
  • Difficulty: Really Easy
  • Time to Complete: 15 - 30 mins
  • Tools Required: Nutdriver, Screw drivers
  • 4 of 5 people found this instruction helpful
Pulled airconditioner out of Housing. Removed screws holding plastic cover in place. Loosened lock ring. Removed old fan blades and replaced with new fan blades. Reassembled plastic cover and returned air conditioner to housing. The unit is now quieter than before!

All louvers were seperated from louver link.

  • Customer: Allen from Marshall, TX
  • Difficulty: Really Easy
  • Time to Complete: 1- 2 hours
  • Tools Required: Screw drivers
  • 0 of 1 people found this instruction helpful
Removed two screws then remove front cover from the A/C. Removed louver assembley from cover. No tools needed. The louver Assy. snaps in place. Install new louver assy. in cover. Install cover assy. on A/C.
All Instructions for the 15-187A
1-5 of 5