143660 - Overview

Models starting with 143660

Click on the best match to narrow your results.

Parts for models starting with 143660

2-Speed Drive Motor with Jumper Wire – Part Number: 12002353

Part #12002353

This two speed split phase washing machine motor performs 1725 revolutions per minute in one speed and 1140 revolutions per minute in the other speed. This motor runs at 1/2 horsepower and it carries 8.0 amps. It's a good idea to change your washer's belts at the same time as you replace this motor, as they may have become worn as well.

$6.40

Screw, T-30 Hex Washer Hd Sems

Part #30063

Use Tc-35857 Valve-shut Off

Part #35857

$7.42

Trimmer Spark Plug Cover

Part #610118

This spark plug cover is supplied directly from the original equipment manufacturer. The rubber and metal component is often used in snowthrower engines, and is sold individually. The spark plug cover is fitted over the spark plug wire connection, providing protection. A screwdriver and pliers may be required for the removal and replacement.

$6.40

Screw (1/4-20x1)

Part #650451

Drive Motor - 115V 60Hz

Part #Y302278

This motor performs 1725 revolutions per minute. This motor is used for some of Maytag's 06 series gas or electric drive blower model clothes dryers that use two belts.

$6.40

Screw (8-32x3/8)

Part #650760

$6.40

Screw-Shutter

Part #650506

$33.34

Fuel Line

Part #30962

This is a genuine Tecumseh part for use with Lawn and Garden Equipment Engines. The fuel line supplies gas from the tank to the carburetor. The most common reason for replacing the fuel line is when the engine is leaking fuel. This part is sold individually. The tools that you will need to replace the fuel line is a 5/16 inch socket or nut driver and pliers.

$2.99

OBS ROTOR ASY

Part #29774

$6.40

Washer

Part #28558

$6.40

Brushing, Governor Lever

Part #31966

Repair Tips From Fixers Like You

See how others fixed this model. Time, tools, difficulty, and steps that lead to victory! View More

Motor Froze

22 of 28 people found this instruction helpful.

Matt from Oxford, GA
A Bit Difficult
1- 2 hours
Nutdriver, Pliers, Screw drivers

Make sure to release the springs and pulleys before you try to tackle the bolts that hold the motor base to the bottom of the washer. Mine were a bit rusty and took some force to break loose. Also it's a good idea to take pictures of how everything sits before you disassemble as the pictures in the repair kit are not very clear. Oth ... Read more

Read less

Was this helpful?

the motor burnt out

17 of 24 people found this instruction helpful.

walter from watertown, WI
Really Easy
1- 2 hours
Socket set

took washer into the garage, removed front cover & disconnected the wiring. Then i removed the motor assembly. Piece of cake to finish job.

Was this helpful?