EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

143340110 Kenmore Range - Instructions

All Instructions for the 143340110
1 - 11 of 11

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
fan motor was loud,sqeal,would not get cold
35 of 42 people found this instruction helpful.
  • Thomas from Monsey, NY
  • Easy
  • 15 - 30 mins
  • Pliers, Screw drivers
Very easy, hardest part was taking panels out of way. 20 min. to finish. After repair it works like new.About 20 years old.
Was this helpful?
Thank you for voting!
My Fan in the Freezer was making a loud noise
15 of 21 people found this instruction helpful.
  • Michael from Imperial, MO
  • A Bit Difficult
  • 1- 2 hours
  • Screw drivers
I went on the web to search for parts, did my screening of companies, and chose Partselect.com
They gave me accurate information, very nice, and double checked the part numbers, and the latest replacement part. I received it in a couple of days, followed the directions, and it's working just fine! I saved a lot of money through Parts elect, instead of buying a new refrigerator.
NICE JOB Partselect!!
Thanks,
Michael
Was this helpful?
Thank you for voting!
The fan quit
11 of 19 people found this instruction helpful.
  • donn from Ranier, MN
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
I took the old one out and put the new one in. EASY!
Was this helpful?
Thank you for voting!
fridge making bad noise
2 of 4 people found this instruction helpful.
  • Kevin from LEVAN, UT
  • Really Easy
  • 15 - 30 mins
  • Nutdriver
Removed cover change mounting bracket on fan put it back in works great
Was this helpful?
Thank you for voting!
high pitch intermittent screech sound coming from within the freezer compartment.
  • Steve from Kent, WA
  • Really Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
Unplugged freezer, removed lower shelving, removed panel covering the evaporator motor. Unpluged three wires connected to fan assem and removed. Did not install new wiring that came with kit but installed new motor/fan and reconnected existing wiring. Problem gone!
Was this helpful?
Thank you for voting!
Intermitant squealing noise from freezer area.
  • Harry from Torrance, CA
  • Easy
  • 15 - 30 mins
  • Nutdriver, Screw drivers
I basically followed the step-by-step instructions at the parts order website. I removed the shelves and rear panels to access the fan. I noted the color coding on the wires and terminals, removed the two retainer screws, removed the old fan from the mounting bracket, installed the new fan using the rubber anti-vibration mounts, pressed -on the fan to the center drive shaft and re-installed the assembly to the back wall. I simply replaced the rear panels and shelves and plugged in the fridge. The only issue I had was the distance needed to press on the fan blade to preclude fan noise, which I found by trial and error, before re-installing the panels.
Was this helpful?
Thank you for voting!
Evap Fan Motor went bad
  • Aaron from Metz, WV
  • A Bit Difficult
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
This was an easy part to find thanks to its universality. The only difficulty was the electric snap-on connection - had to use the old one and tie the wires to the new motor - that was easy. Hardest part was the new screws to mount to bracket weren't long enough. Had to find one in my screw jar to match threads that was long enough. W orks Great!!!
Was this helpful?
Thank you for voting!
The evaporator fan motor was squealing, and rumbling.
  • Robert from Indiana, PA
  • Easy
  • 1- 2 hours
  • Screw drivers, Socket set
First I watched PartSelect videos that Bing rounded up describing the repair. I saw how to remove an ice maker, the back panel of the freezer, and remove and replace the fan and motor. The order was made on Wednesday, arrived Thursday and installed Friday. I took the time to clean everything while it was apart. The refrigerator is run ning like a new one, quietly and colder than before. It felt good to be able to do it my self. My wife was sure the refrigerator was going to stop running, but I proved her wrong.
Was this helpful?
Thank you for voting!
evaporator fan, noisy
  • John from Iselin, NJ
  • Really Easy
  • Less than 15 mins
  • Nutdriver, Screw drivers
Remove freezer shelves, panel, and change fan.
Was this helpful?
Thank you for voting!
All Instructions for the 143340110
1 - 11 of 11