142R Husqvarna - Parts

This 5/16 Lock Nut can be installed using a wrench or socket. It's used to secure parts in place. If the part being secured seems loose, check for damage and replace if necessary. Refer to your make, model, andd diagrams to ensure this is the correct part for you.

This authentic OEM metering diaphragm assembly is housed within the carburetor of your lawn and garden equipment. Positioned between the carburetor body and the fuel pump, it regulates fuel delivery and maintains the air-fuel ratio within the engine. It has a self-adjusting vacuum system and responds to the amount of fuel being drawn into...Read more the engine. When the engine runs at higher speeds, more fuel is pulled in and the diaphragm compresses. As a result, the pin in the center of the diaphragm pushes against the metering level and lifts the regulator inlet needle, letting additional fuel flow from the pump into the reservoir. If the assembly malfunctions, you may experience engine stalling, rough idling, or notice fuel odor, pooling, or dripping around the carburetor area. To remove the metering diaphragm, refer to your user guide for instructions on locating and accessing the carburetor. This typically involves removing the fuel pump cover screw and pump cover, followed by the fuel pump diaphragm and gasket. Remember to blow through the external pulse hole on the body casting and remove the filter screen before proceeding to remove the four screws securing the metering diaphragm plate and the metering diaphragm itself. Please note that this replacement part is sold individually.

This genuine manufacturer-sourced replacement part is specially designed for use with Poulan and Husqvarna lawn and garden equipment. This is a standard hardware which has multiple applications based on the model of your unit, please refer to the appropriate diagrams for the correct location and use of this part. Keep in mind this high-quality metal nut is sold individually.

This is a genuine, OEM sourced replacement part that is intended to be used with riding lawnmowers from Husqvarna, Poulan, and Jonsered. The metal pulley mounts to the mower\\\'s deck and is used to guide the path that the belt travels. This item is sold as an individual replacement part.

This is a genuine manufacturer-sourced part that is specially designed for Husqvarna handheld lawn and garden equipment. This grommet fits in the fuel tank and it helps to secure the hose, unfortunately, over time the material may wear out and even begin to crack eventually requiring a replacement. Keep in mind it is made of high-quality ...Read morerubber and is sold individually. Please make sure to check the appropriate diagrams of your model for the correct location and application of this item.

This authentic replacement part is designed for use with Husqvarna lawn and garden equipment. Ball bearings are used to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Bearings experience constant wear from pres...Read moresure, heat, vibration and friction, because of this, many bearings need to be periodically replaced. Please note this high-quality component is sold individually. Make sure to refer to the appropriate diagrams of your model for the correct location and application of this part.

This authentic manufacturer-sourced part is specially designed for use with Poulan, Ryobi and Husqvarna riding lawn mowers and garden tractors. It helps to distribute the pressure evenly to ensure a tight seal between connected components. Please make sure to refer to the appropriate diagrams of your model for the correct location and app...Read morelication of this hardware. Keep in mind this high-quality washer is made of durable material and is sold individually.

This is a genuine OEM sourced replacement part commonly used on lawn and garden equipment. This specially designed lock nut resists loosening when it is properly threaded onto a bolt. It is has multiple applications depending on the model of your equipment. Always make sure to check appropriate diagrams for correct use and location of thi...Read mores nut. Includes one item per order. You will need a wrench to tighten or loosen this hex nut.

This is a genuine Husqvarna replacement part sourced from the original manufacturer for use with riding lawnmowers. The plastic cruise control knob is used to provide the user with a grip to the rod that engages the cruise control assembly. This cruise control knob can be purchased individually.

This part is sold individually even though two may be needed. The bumper dash goes next to the bumper hood and helps to protect the dash. A screwdriver and a set of pliers may be required to replace this part if it becomes broken. It is made out of rubber and is an OEM sourced directly from the manufacturer for use in ride mowers and lawn tractors made by Husqvarna.

It is an authentic OEM sourced part which is specially designed for use with Husqvarna and Poulan lawn and garden equipment. This part provides an identical replacement for a missing or a faulty bracket clutch anti-rotation that was installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correc...Read moret location and application of this hardware. Keep in mind this high-quality item is made of durable metal and is sold individually.

This genuine OEM belt guard is designed for use with lawn tractors and riding mowers manufactured by Husqvarna, Ryobi, Poulan, Weed Eater, and Jonsered. Positioned between the washer and the arm idler, it helps guide the belt and maintain proper alignment during operation. Made of durable metal, this part should be replaced if it becomes ...Read moredamaged or broken. It is sold individually, and tools such as a set of pliers, a socket set, and a wrench set may be needed for installation. For accurate placement, refer to your model’s diagram.