141L Husqvarna Chainsaw - Parts

This replacement screw is an authentic OEM sourced hardware that is designed for use with Poulan and Husqvarna chainsaws. It is used to secure the air filter element. This screw is made from durable high quality metal and it is sold individually.

This is a genuine Husqvarna part for use with Chainsaws. The Chain brake stops the chain when engaged or in the event of kickback. The most common reason for replacing the chain brake is when the chain brake is not engaging or stopping when the brake is applied, the brake band is not tightening around clutch drum, cannot reset the chain...Read more brake, the handguard is not engaging the chain brake assembly and the chain brake components are cracked or damaged. This part is sold individually. Here is a list of tools that are needed to replace the chain brake a chain adjustment tool (Scrench); or ratchet/socket/wrench set, flat-blade screwdriver, long-handled screwdriver, Phillips driver, Torx drivers and long-nosed pliers. Let the engine cool and disconnect the spark plug wire before installing this part.

This genuine replacement part is supplied from original equipment manufacturer. It is a commonly used item on chainsaws. This is one of the two bolts used to secure muffler. This is a hex socket head bolt and it is sold individually. You will need a hex key/allen wrench to remove or secure this bolt.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with chainsaws. The special pulley is used to house the starter rope and support the starter spring. This pulley is available as an individual replacement part, please see model diagram for associative parts.

This is an original replacement part manufactured for use with chainsaws and leaf blowers. The washer is commonly used to disperse the pressure put on the flywheel by a nut across a wider surface area. This washer is available as an individual replacement part, please see model diagram for associative parts.

It is a genuine item is supplied by the original manufacturer for use with Poulan, Jonsered and Husqvarna chainsaws. This plunger and gear assembly functions as an oil pump that helps to lubricate the chain. Unfortunately, over time components may wear out or get damaged eventually seizing operation and requiring a replacement. This high-...Read morequality assembly consists of a durable plastic housing and a metal plunger with a gear. Refer to the owners manual and the diagrams of your model for the correct application of this assembly. You will need a screwdriver and a wrench set to perform this repair.

This authentic manufacturer-sourced component is specially designed for Poulan and Husqvarna gas-powered chainsaws. It is an identical replacement for a missing or a damaged retainer that is utilized to secure the piston pin. To ensure the exact location and the correct application of this product, refer to the appropriate diagrams for yo...Read moreur specific model. Keep in mind this high-quality hardware is made of durable metal and is sold as an individual item.

This is a genuine manufacturer-sourced replacement screw, it is specially designed for use with lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please make sure to check appropriate diagrams for correct location and use of this item. It is a high-quality hex head screw which is sold individually.

This is a genuine manufacturer-sourced component which is specially designed for use with Poulan chainsaws. It is an identical replacment for a missing or faulty scrench that was included with a new unit, please make sure to refer to the owners manual for the correct location and application of this part. Keep in mind this high-quality part is made of durable metal and is sold individually.

This is an authentic part assembled by original manufacturer. It fits various models of Poulan chainsaws. Ball bearings lessen friction between moving parts. They also hold and stabilize parts\' position and angle. Bearings are high wear pieces and can need replacement often. Included is one (1) bearing and one (1) seal.

It is an OEM part which is made for use with Poulan and Husqvarna chainsaws. This is the special seal which helps to supply the oil. If the part is missing or is damaged, this will provide an identical replacement for the original component that was installed on a new unit. Check the appropriate diagrams for your model to ensure the prope...Read morer repair procedure. One durable rubber oil seal is included. A screwdriver and a wrench set will be needed to take the housing apart.

This is available as an individual replacement part. The cover-bolt connects to the muffler and is made of metal. If this part becomes broken it will need to be replaced and may require a wrench during the installation. This is an OEM Poulan and Husqvarna part directly sourced from the manufacturer for use in chainsaws.