1413 - Parts

This washer/dryer lid or door switch kit serves as a critical safety component, designed to prevent the appliance from operating when the lid or door is open. It ensures that the washer does not fill or spin and the dryer does not start unless the door is securely closed, helping to avoid water spills and potential safety hazards. The kit...Read more includes all necessary components for installation and is compatible with a wide range of top-loading washers and front-loading dryers. Installation typically involves disconnecting power, accessing the control panel or door area, and replacing the switch using standard tools. The switch is compact and designed to fit seamlessly within the appliance’s housing, with dimensions approximately 2.5 inches in length, 1 inch in width, and 1 inch in height. It features a neutral color finish that blends with most appliance interiors.

This genuine dishwasher upper rack assembly provides secure, organized storage for glasses, cups, bowls, and smaller dishes while allowing water and detergent to circulate effectively for thorough cleaning. Designed to slide smoothly on the dishwasher's upper rails, it helps maximize loading space and restore proper rack function when the...Read more original rack becomes rusted, damaged, or difficult to move. This replacement rack is supplied as the rack assembly only; components such as rollers, clips, spray arms, and other attached accessories may need to be transferred from the original rack. Installation typically involves removing the rack stops, sliding the old upper rack out of the rails, transferring any required components, and sliding the new rack into place before reinstalling the rack stops. The rack measures approximately 20 inches wide, 19 inches deep, and 6 inches high.

This 10-32-inch hex nut works with multiple appliances in your home as a fastener. This specific model is sold individually. Hex nuts usually have 6 even sides and together they are used with bolts and screws in order to hold items firmly together. This piece is a fastener that attaches one item to another. This part has several advantage...Read mores, the main one being that it is universal and can be used with most pieces and appliances in your home. This hex nut is an original equipment manufacturer part, meaning it is directly sourced from the manufacturer.

The Oil Seal is a manufacturer-approved rubber part which provides a seal between the crankcase and crankshaft by attaching around the axle shaft on the crankhouse housing. Installation is rated as "Medium" difficulty and requires a screw driver, wrench set and seal puller. A broken seal will cause a leak, and the part must be replaced. R...Read moreefer to your make, model and diagram to ensure you're choosing the right part. This part comes in black and gray.

Introducing the Briggs and Stratton Starter Pulley, a vital component for your equipment repair needs. Crafted with quality and precision, this pulley plays a significant role in your engine's start-up process. It ensures smooth and efficient operation, reducing wear and tear on your engine. Designed for longevity and durability, the Brig...Read moregs and Stratton Starter Pulley guarantees sustainable performance. With this product, maintaining the functionality and longevity of your Briggs and Stratton engine has never been easier. Trust in Briggs and Stratton for reliable, high-quality engine parts.

This rewind starter spring or as it is also known, recoil spring, rewinds the pull robe back into the starter housing of your engine. The spring is made of metal, silver colored, and sold individually. Over time, you may notice that you are having trouble retracting your pull cord, which could be a symptom of the rewind starter spring f...Read moreailing due to fatigue or wear. Replacing this part is a repair our customers found easy. Locate and replace the start spring inside the starter housing; no special tools are required for this job.

This is a five-loop broil element for an oven, range, or stove. It is approximately 11-3/4 inches wide and 18-5/8 inches long with approximately 11-3/4 inches between terminal connections. It features a.25-inch male terminal push-in connection for easy replacement and a hanger style mount. It is 3000/2500 watts and 240/208 volts. This bro...Read moreil element is located on the inner upper wall of your oven. Be sure your element wires do not fall through the wall of your oven when you uninstall the existing part. The wires are short and will make your repair more difficult because they are difficult to retrieve.

This fuel line is compatible with several different makes and models of small engine equipment and is sold as an individual part. Equipped with the securing clamp, this rubber fuel line is used to transfer fuel from the fuel tank to the carburetor, and over time and due to exposure of gas, this fuel line can become brittle and crack, requ...Read moreiring a replacement. If you find your equipment is performing worse, check the fuel line for any visible signs of damage. To replace the fuel line, you will need to disconnect the spark plug and drain the fuel from your equipment, before simply removing the old line and installing the new one and reassembling the rest of the motor.

This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

This is a high-quality manufacturer-sourced part which is made for use with Briggs and Stratton engines commonly installed on lawn and garden equipment. It helps to distribute the pressure evenly and provide a tight seal for the breather. Over time it may become brittle and begin to crack eventually requiring a replacement. For the proper...Read more application please refer to the appropriate diagrams of your model. This high-quality part is made of durable composite material and is sold individually. You will need a screwdriver and a wrench set to remove and reattach the breather.