13AP61KP011 (2009) Troy-Bilt Lawn Tractor - Parts

This nut is a manufacturer-approved replacement part for various lawn and garden equipment. It is sold individually, not as part of a kit or assembly. Also referred to as a Lock Nut, it is resistant to loosening when threaded on a bolt. It has a variety of applications and is used in multiple locations on most models. Please refer to your...Read more owners manual to determine the exact location. While made of durable metal, the ends can round off from improper use of a wrench or socket. Depending on the location, this part may also become worn through regular use of your machine. It should be replaced when visibly cracked, worn or damaged. To complete this repair, you will need a wrench or socket, and a torque wrench. Ensure you torque the bolt according to the manufacturer recommendations. Customers rate this repair as Easy.

The Lock Ball Joint Assembly is part of the steering mechanism, and the machine will not be able to steer without it. This part attaches to the steering block and drag link. Installation is rated as "Easy" and requires a wrench set and socket set.

This OEM Deck Adjustment Gear connects to the bracket at the rear of the deck and is necessary to move the deck up or down. If this part fails, installation of this replacement is rated as "Easy" and requires just a pair of pliers, a socket set and screwdriver.

This steel axle pivot bar assembly connects the front spindle assemblies to support smooth steering and proper front-end movement. Built from durable, corrosion-resistant steel, it provides dependable structural support and helps restore stable handling when replacing worn components.

The hex flange bearing connects to the steering shaft. This item is available as an individual replacement part. This part is an OEM from Troy-Bilt, MTD, Yard Man, and Cub Cadet for use in lawn tractors. It is made of metal and may require a wrench during installation. Over time this part may break or become stripped and will need to be replaced.

This genuine manufacturer-sourced replacement flat washer is designed for use with lawn and garden equipment. It helps to distribute the pressure evenly allowing parts to be secured safely, this is a standard hardware which has multiple applications based on the model of your equipment. Please refer to appropriate diagrams for the correct...Read more location and use of this item. This washer is made of high-quality metal and it is sold individually.

This OEM Top Locknut measures 5/16x18, is made of metal, and it isused to secure parts in place and prevent backing out from vibration. Replacing this part varies in difficulty depending on the part it is securing and the equipment in question, but it is generally an easy job according to our customers. Installation requires a wrench or socket.

This is an authentic Craftsman replacement part, sourced from the original manufacturer for use with riding lawnmowers. The special wheel is commonly used to support the front end of the mower\\\'s deck and to guide the deck over the ground. This special wheel is available as an individual replacement part, please note two are required.

This Cotter Pin is a silver 5/32x1-1/4 metal part, sold individually and certified by the original equipment manufacturer. It connects to the axel shaft after the wheel and washer have been installed but before the hub cap. It is used to prevent the wheel from falling off, and if it breaks (due to fatigue) the wheel will fall off. Check...Read more your model number for the correct size of replacement cotter pin to know you are ordering the correct model. This is a one-time use product, which should be replaced during any other repair in which it is disturbed or dislodged.

It is an authentic OEM item which is designed for riding lawn mowers and garden tractors. The draglink attaches to the spindle and the gear-selector plate. It is an important component of the steering mechanism that allows a user to control the unit. If the drag link is damaged or is missing, this part will provide an identical replacemen...Read moret for the original item that was installed on a new unit. One durable metal right-hand draglink is included. Note, the left-hand draglink is sold separately. Refer to the diagrams of your model to ensure the correct installation of this component. Keep in mind the hardware to secure it is sold separately. You will need a wrench set to remove the old draglink and attach the new one.