My Orders
- Home
- 13AM761F265
- Instructions
13AM761F265 (2009) Bolens Lawn Tractor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil Drain Sleeve
8 of 13 people
found this instruction helpful.
-
Laurie from RICHLANDS, NC
- Very Easy
- Less than 15 mins
-
Pliers, Socket set, Wrench (Adjustable), Wrench set
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Was this helpful?
Thank you for voting!
Didn't line up very easy
2 of 4 people
found this instruction helpful.
-
michael from eden, NC
- A Bit Difficult
- Less than 15 mins
Put one side in bottom first and you have to slightly twist the lens to get the other clips to pop in.
Was this helpful?
Thank you for voting!
Bent the old one on a stump
2 of 4 people
found this instruction helpful.
-
George from BAY VILLAGE, OH
- Really Easy
- Less than 15 mins
-
Socket set
Removed one 1/2" bolt to remove old part .
Slipped new part in place. put bolt in open loop and tightened.
Slipped new part in place. put bolt in open loop and tightened.
Was this helpful?
Thank you for voting!
light switch broken
2 of 7 people
found this instruction helpful.
-
GINO from MURRAY, KY
- Really Easy
- 30 - 60 mins
-
Pliers, Screw drivers, Wrench (Adjustable)
Had to pull stove out of the way for easier replacement of the hood switch. Exact replacement part was simple to change.
Was this helpful?
Thank you for voting!
Mixer began to make a noise on speed two and higher
8 of 31 people
found this instruction helpful.
-
LISA M from BATESVILLE, AR
- Really Easy
- Less than 15 mins
We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do
... Read more
es not make the slight howl sound.
Read less
Was this helpful?
Thank you for voting!