My Orders
- Home
- 13AL78XT093
- Instructions
13AL78XT093 (2020) MTD Lawn Tractor - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Oil Drain Sleeve
8 of 13 people
found this instruction helpful.
-
Laurie from RICHLANDS, NC
- Very Easy
- Less than 15 mins
-
Pliers, Socket set, Wrench (Adjustable), Wrench set
I wish this was longer...it's only about 6", barely enough to have the oil flow past the metal plate of the riding lawnmower. I'm going to figure out a way to make a permanent extension something like this video would be SO much better https://www.youtube.com/watch?v=G9ZVoeqr6R8&t=79s
Was this helpful?
Thank you for voting!
upper transmission belt cracked bad
6 of 7 people
found this instruction helpful.
-
William from TRIANGLE, VA
- Easy
- 30 - 60 mins
-
Pliers, Wrench set
Removed battery, then battery hanger brackets.
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ... Read more ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Removed the tension spring from under side of seat. That was a little tuff to do. put a long phillips screw driver through transmission pulley.
put a 7/8 box wrench on pulley nut and removed it. took old belt off and installed new one. Reversed order of removal.
Getting the t ... Read more ension spring back into the bracket hole was a little tricky. I used a pair of long needle nose pliers to re install the spring.
cut my yard and I'm a happy camper !!!!!!!!!!!!!!!!!!
Read less
Was this helpful?
Thank you for voting!
Blade got bend after hit a stump so had to buy new spindle shaft
6 of 27 people
found this instruction helpful.
-
Randall from GALLIPOLIS, OH
- Very Easy
- Less than 15 mins
-
Socket set
The repair was a very easy.
Was this helpful?
Thank you for voting!