1376 - Parts

This manufacturer-certified Hex Bolt, measuring 5/16-18 x .75 inch, is a gold, metal, individually sold bolt. It can be installed using a wrench or socket and torque wrench, by tightening to manufacturer specifications. If damaged (likely due to fatigue) the threads will be stripped, or the ends rounded off. If broken or missing, it sho...Read moreuld be replaced. Refer to your owners manual or model number to ensure you are purchasing the correct part.

This is an original part MTD, Yard-Man, Yard Machines, Troy-Bilt and Ryobi part for use with Lawn Tractors. The throttle cable stops the engine when you shift the lever to the Stop position. The most common reason for replacing the throttle control is when the engine doesn't throttle up when the throttle lever is increased. This part is s...Read moreold individually. The tools that you will need to replace the throttle cable are a 3/8 inch socket, -+ inch socket or nut driver, 5/16 inch socket or nut driver.

This filter canister assembly is supplied from the original manufacturer for use with Powermate and Husky air compressors. The part helps to ensure that the air that goes through the unit is free of dust and other harmful contaminants. Over time it will wear out and get clogged causing poor air intake and reduced performance. Note, this h...Read moreigh-quality assembly is sold as an individual item. Replacing it is a simple task that should not require any special tools.

The flat washer goes between the drive shaft and the flange bearing. It is an authentic OEM sourced item which is specially produced for use with lawn tractors and tillers made by MTD, Ryobi, Yard Machines, Troy-Bilt, Bolens, Yard Man, and Cub Cadet. This item is made of metal and is available as an individual replacement part. A wrench a...Read morend a set of pliers may be helpful when replacing this part. This washer may become broken and will need to be replaced.

This OEM spring bell washer is a small, circular piece of metal that is shaped like a cone and has an inside diameter of 1/4 of an inch. It is also called a Belleville washer or a disc spring, and it is used in lawn equipment to help spread out pressure and absorb shock between parts. If a washer is broken, it may look flattened or distor...Read moreted, and your machine may make unusual vibrations or noises. If you do not replace a damaged spring bell washer, your machine will wear out faster because there will be nothing to cushion its parts. To remove a washer, you can use pliers or a flathead screwdriver to pry it from your machine. If it is difficult to remove, you can use a penetrating oil to loosen it first. To make sure you purchase the correct number of washers, which are sold separately, check your user guide to see where they are needed in your machine.

The petcock attaches to the bushing and the o-ring and is made of metal. This part is an OEM from Powermate for use in air compressors. Keep in mind this high-quality part is sold individually. An adjustable wrench might be needed during the installation process. This item may become broken or stripped and will need to be replaced.

It is a genuine item that is supplied by the original equipment manufacturer for use with Powermate air compressors. A check valve allows flow in one direction and automatically prevents reverse flow. It provides an identical replacement for a missing or a faulty component that was installed on a new unit. Please make sure to refer to the...Read more appropriate diagrams of your model for the correct location and application of this check valve. Keep in mind this high-quality part is made of durable metal and is sold individually.

This part is available as an individual replacement. The valve plate to cylinder gasket is made of a thin material. During replacement, it may require a socket set and an adjustable wrench to help install this part correctly. It will need to be replaced if it becomes broken. This is a genuine OEM sourced part which is specially designed for use with Powermate compressors.