136S - Parts

This is an original Craftsman replacement part. The carriage screw is designed by the manufacturer for use in snowblowers and lawn tractors. This part is made of metal, and may be found in various locations in the machine, depending on model. Please be aware that there are different screws used in the machine. Refer to the parts diagr...Read moream to be sure of ordering the correct part. You will require a wrench when replacing this item. This part is sold individually.

This brake bracket assembly is designed to stop mower blades when the clutch is disengaged, helping ensure safe operation during use and maintenance. Made from durable metal to withstand repeated stress and torque, it functions as a critical deck brake component that supports proper blade shutdown. It’s a dependable replacement for mainta...Read moreining mower deck safety and protecting surrounding components from unnecessary wear.

This genuine manufacturer-sourced replacement throttle cable is designed for use with riding lawn mowers and garden tractors. The throttle cable is connected to the carburetor and it stops the engine when you shift the lever to the full choke position. It is a high-quality rubber insulated cable which is sold individually. Please make sur...Read moree to refer to the appropriate diagrams of your model to ensure the correct repair procedure.

This is a genuine Poulan and Husqvarna part. The recoil starter spins the crankshaft to start the engine when you pull the rope. The most common reason for replacing the recoil starter is if the rope or spring breaks, causing the engine to not start. This part is sold individually. The tools that you will need to replace the recoil starter is a 3/8" socket and a 5/16" socket.

The internal snap ring fits between the bearing and the spacer. It is an authentic part for lawn tractors from MTD, Bolens, Yard Man, Troy-Bilt, Yard Machines, and Cub Cadet. This item is available as an individual replacement part. A socket set might be necessary during the installation of this part. The ring is made out of metal and will need to be replaced if it breaks.

This authentic manufacturer-sourced component is specially designed for use on lawn and garden equipment. It is an identical replacement for a missing or a damaged hardware that was installed on a new unit. Make sure to refer to the diagrams for your specific model for the exact location and the correct application of this screw. Keep in ...Read moremind this high-quality product is made of durable metal and is sold as an individual item. A wrench will be needed to secure or remove it.

This is a genuine manufacturer-sourced component which is specially designed for use with MTD and Yard Machines riding lawn mowers and garden tractors. The purpose of this pulley is to apply tension to the belt. It provides an identical replacement for a missing or a faulty part that was installed on a new unit. Please make sure to refer ...Read moreto the appropriate diagrams of your model for the exact location and application of this idler pulley. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic replacement part that has been sourced from the original manufacturer to be used with trimmers and lawnmowers from Ryobi and MTD. The metal nut is used with different types of machines and the application of the nut can vary based on the model of the equipment. It is recommended to verify the part\\\'s compatibility a...Read morend usage by reviewing your model\\\'s diagram. This nut is available as an individual replacement part. A hex socket wrench and a driver are needed when installing this part.