All Installation Instructions for 1366

remove and replace

10 of 24 people found this instruction helpful.

Perry from Flushing, NY
Really Easy
Less than 15 mins

very easy remove the bad bulb install the new one

Was this helpful?

Fluorescent lamp bulb

1 person found this instruction helpful.

Danial from HILLSBORO, TX
Really Easy
15 - 30 mins
Screw drivers

Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.

Was this helpful?

dropped & broke the oven light bulb cover

1 of 2 people found this instruction helpful.

joseph from san jose, CA
Really Easy
Less than 15 mins

popped the new one on!

Was this helpful?

Solenoid failed due to excessive heat.

0 of 1 people found this instruction helpful.

Joseph from Martins Creek, PA
Easy
30 - 60 mins
Nutdriver, Screw drivers

Removed back panel. Removed the defective solenoid on its bracket. Replaced it with the new door latch solenoid. This was relatively easy. Replaced the back panel. Tested self cleaning feature. Everything worked fine. I have preformed this same repair once before.

Was this helpful?

Mixer began to make a noise on speed two and higher

8 of 31 people found this instruction helpful.

LISA M from BATESVILLE, AR
Really Easy
Less than 15 mins

We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do ... Read more

Read less

Was this helpful?

1366 - Instructions