1364 - Instructions

very easy remove the bad bulb install the new one

repair didn't happen the part was the wrong size so i wasted $20 and my time because the part was on back order (which the website did not show) Will never use you service again, complete waste of time and money

Kobalt 15g compressor.
* unscrew 6 T-20 to remove compressor housing cover.

* disconnect 2x black wire and 2x wire, and 2x green.

* use hand torch (or lighter) to soften tubing.

034-0174 is a discontinued pressure swirch. Purchased 034-0192 which fit perfectly. Only difference between 0174 and ... Read more 0192 is the unloader valve. Which I did not need as its my unit is piped separately.

Unscrew the metal rim and remove the glass window. Remove the old bulb by twesting the bulb towards you. Place the new bulb's pins into the slots and twest away from you. Place the metal rims back in place and screw them down.

popped the new one on!

Removed back panel. Removed the defective solenoid on its bracket. Replaced it with the new door latch solenoid. This was relatively easy. Replaced the back panel. Tested self cleaning feature. Everything worked fine. I have preformed this same repair once before.

I tried to order a light socket but you sent me a blade then cancelled my order and refunded my money after I waited for the right part.

We took our 30 plus year mixer apart. I removed the old grease. There was some crumbly looking grease in the main housing gear section where the nylon gear is located. It looked like it had flour mixed in it. Not certain. Removed as best possible all old grease and applied 6 oz. of new Benalene grease to all of the gears. Now it do ... Read more es not make the slight howl sound.