13621 Briggs and Stratton Engine - Parts

The cylinder head gasket, also known just as the head gasket, is an OEM part sold individually. Grey in color, the head gasket provides a seal between the cylinder head and the engine block in your engine. Over time, it can become damaged due to wear. You may also need to replace this part any time you have had to remove the cylinder hea...Read mored for any other reason, as the gasket is a one time use. If you suspect your head gasket is damaged, perform a compression test. In doing so, you may hear air escaping from the head gasket area, and you will know this part is responsible. Symptoms that can be exhibited if this part needs replacing include an engine lacking power. Most of our customers thought this was a medium-difficulty repair. The repair requires a wrench or sockets and a torque wrench. When re-installing your head gasket, torque in an alternating patter to the manufacturer specifications for a proper seal.

This magneto, also known as an ignition coil, is a genuine OEM replacement part for outdoor power equipment. It generates the spark needed to ignite the air-fuel mixture in the engine’s combustion chamber, ensuring smooth and reliable operation. Over time, the magneto may fail due to worn wiring, damage to the spark plug lead, or incorrec...Read moret gapping between the coil and flywheel. Symptoms of a faulty magneto include misfiring, hard starting, and poor performance. Installation involves removing the spark plug for safety, accessing the flywheel, and setting the correct gap with a feeler gauge before securing the new part.

This is a genuine OEM sourced replacement part. It is designed for use with lawn and garden engines. It is an important part of the starter assembly that is used to crank start the unit. Please note shroud/housing, starter pulley, starter spring, grip, the pull rope and the hardware are all sold separately. This pawl plate is made out of ...Read moreplastic and it is sold individually. To complete this repair you would need a wrench.

This OEM Oil Seal is an individually sold rubber part which is attached around the axis shaft on the crankcase housing to provide a proper seal. A broken seal will lead to a leak, and the part should be replaced. Installation is rated as "Medium" difficulty by customers, and will require a screwdriver, wrenchset and seal puller. Refer to ...Read moreyour make, model and diagrams to ensure you've chosen the correct part. This model comes in black and grey.

This is a genuine replacement pre-cleaner filter used with Briggs and Stratton engines. It is supplied directly from original equipment manufacturer. Its purpose is to filter out dust and debris from contaminating the engine. This filter is made out of paper and metal. This item is sold individually. Replacing this filter is a simple that that would only require a wrench.

This item is available as an individual replacement part but also includes the screws. The muffler deflector attaches to the lo-tone muffler and is made of metal. A nutdriver might be required during the replacement of this item. It may become broken and will need to be replaced. This is an authentic Briggs & Stratton and Toro replacement...Read more part that is sourced from the original manufacturer for use with engines, snowthrowers, tillers, lawn mowers, and lawn tractors.

This carburetor is a genuine replacement component designed for use with Briggs & Stratton single-cylinder L-head engines, primarily those in the 5hp range, including models from the 130202 and 112202 series. It plays a critical role in regulating the air-fuel mixture for optimal engine performance. Commonly found in outdoor power equipme...Read morent such as tillers, lawnmowers, and pressure washers, this carburetor helps restore reliable starting, smooth operation, and fuel efficiency. It is often sold as part of a comprehensive kit that includes gaskets, spark plugs, and air filters for a complete engine tune-up. Installation involves removing the old carburetor, cleaning the mounting area, and securing the new unit with the included components. This part replaces several older models and is ideal for engines experiencing poor performance, hard starts, or inconsistent operation.

The Crankcase Gasket (.015) is a manufacturer-certified part which is rated as being "Medium" difficulty to install. It will require a screwdriver, socket set, wrench set, and nut driver. It s used to provide an air seal between the crankcase and the cylinder assembly. If broken, there will be oil leaking, and the part should be replaced....Read more Refer to your make, model and diagrams to check if this is the right part for you. This part is made of a composite of materials, and comes in gray.

The Breather Gasket is OEM and used to provide an airtight seal for the breather assembly. It is a gray part, attached between the breather cap and engine. Installation is rated "Easy" and will require a wrench set and socket set. If broken, damaged, or worn due to fatigue, there may be oil leaking from it, and the engine may be running r...Read moreough from an unwanted vacuum sucking in air. If this happens, replace the part. Refer to your make, model and diagrams to ensure this is the correct part for you.

The exhaust gasket attaches to the exhaust manifold and helps to form a seal. It is an authentic OEM sourced part which is specially designed for use with Briggs & Stratton generators and engines, plus Toro snowthrowers and lawn tractors. This gasket is made of a flexible material and is priced individually. A screwdriver and a wrench may be needed to install this part.

This spark plug boot is a genuine OEM Briggs & Stratton replacement designed to fit securely over the spark plug, protecting the connection from moisture, dirt, and debris. Its durable, elbow-style design helps ensure reliable ignition and easy installation, making it an ideal replacement when a cracked, loose, or worn boot causes hard starting, misfires, or inconsistent engine performance.

This is a genuine manufacturer-approved replacement part that is specially produced for use with Briggs and Stratton engines commonly installed on Toro lawn and garden equipment. It is designed to keep the fuel in the tank. This part is made from high-quality black plastic and it is sold individually.