My Orders
1348C06 Roper Range - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
The oven would not ignite
-
Richard from Boise, ID
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the bottom drawer, oven racks, and the oven floor panel. With a #2 cross tip screw driver, I removed the old igniter, replaced it with the new one and tested the unit. When the new igniter began to glow I turned the unit off and reassembled the oven - JOB DONE less than 15 minutes.
Was this helpful?
Thank you for voting!
Igniter in oven not working.
-
Rachel S from Dallas, GA
- Easy
- 15 - 30 mins
-
Nutdriver
Pulled racks and covers out of oven. Moved stove away from wall. removed bolts holding igniter. Disconnected wiring harness. Reverse process to install new part.
Was this helpful?
Thank you for voting!