My Orders
13345 Briggs and Stratton Engine - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
5 HP Briggs and Stratton chipper shredder - no spark
19 of 26 people
found this instruction helpful.
-
Thomas from ALFRED, ME
- Difficult
- 30 - 60 mins
-
Nutdriver, Pliers
Removed old sparkless magneto, replaced with new part PS9278124 Magneto, and still no spark. The only conclusion that I can draw, is this magneto is defective,
Was this helpful?
Thank you for voting!
Wouldn’t start.
18 of 47 people
found this instruction helpful.
-
Bruce from CARNATION, WA
- Really Easy
- 30 - 60 mins
I installed a new solenoid starter. Took me a total of 20 minutes. Started right up.
Was this helpful?
Thank you for voting!
Generator would not start, Birggs & Stratton recommended to replase Gasket Exhaust.
11 of 43 people
found this instruction helpful.
-
Alberto from PALMETTO BAY, FL
- Really Easy
- 30 - 60 mins
-
Socket set
Remove the spark suppresser, 4 face screws, 2 bottom screws and the two screws the hold the gasket. I also had to back out the top screw of the cover it blocked and prevented the removal of the gasket.
Was this helpful?
Thank you for voting!