12A495D099 MTD Chipper Shredder - Parts

This manufacturer certified flail blade is a metal blade used to shred or cut lawn and garden debris. If the blade becomes dull it should be sharpened or replaced, depending on the extent of the damage or warping Installation is rated as "Easy" by customers and requires a hex key and wrench. This blade attaches onto the impeller assembly.

It is a genuine item that is supplied by the original equipment manufacturer for use with garden chipper-shredders. This special pin clip helps to secure the blade-flail. If the part is missing or is damaged, this will provide an identical replacement for the pin clip that was installed on a new unit. To ensure the exact location and the ...Read morecorrect application of this hardware, refer to the appropriate diagrams for your model. Keep in mind this high-quality pin clip is made of durable metal and is sold as an individual item. You may need a screwdriver and pliers to perform this repair.

This Washer-Lock 5/16 is a silver, metal part that is sold individually and comes direct from the manufacturer. With a 5/16 Inch Interior Diameter and 1/2 Inch Outside Diameter, it is used to prevent the nut from backing off and becoming loose on the pulley shaft, and is attached to the drive belt pulley assembly. You will know if you nee...Read mored this because your owners manual will specify it, or the model number of your machine will correspond with this part. If the part is broken due to fatigue, the shafts will free spin when they should be locked together, and must be replaced.

This is a genuine OEM sourced replacement part, not an aftermarket imitation. It is specially manufactured for use with MTD and Troy-Bilt chippers and shredders. This special flat head screw is generally used to secure the chipper blade. It has a hex socket head and it is sold individually.

The air valve attaches to the wheel and is made of a durable material. This is a genuine MTD, Ryobi, Yard Machines, Bolens, Troy-Bilt, and Yard Man part sourced directly from the manufacturer for use in chippers, shredders, cultivators, edgers, lawn tractors, snowblowers, and trimmers. Keep in mind that this part is sold individually. Whe...Read moren replacing this item a set of pliers might be required during the installation process. It might wear out over time and will need replacing.

The Push Cap is a black plastic cap which secures to the end of a shaft to prevent injury. It can be installed with a hammer and is rated as "Easy" to install. If the part appears damaged or worn down in a way that could cause injury, it should be replaced. Refer to your make, model and diagrams to check if this is the right part for you.

Used for quick release of components, such as handles, this 3 Arm Thumb Screw is a manufacturer-sourced replacement part for hundreds of models of blowers and chippers. It is made of plastic and metal, is not sold as part of a kit or assembly, and is sold individually. This part is known to wear over time. If the threads become stripped...Read more, the handle is visibly damaged, or you can no longer tighten or loosen it, you will need to replace it. No tools are required to complete this repair. Customers rate this repair as Easy.

This genuine OEM supplied part is specially designed for use with a variety of lawn and garden equipment. It is a standard hardware which may have multiple applications. Make sure to refer to the appropriate diagrams for your model to ensure the exact location and the correct application of this part. This is an identical replacement for ...Read morea missing or a damaged flange lock nut that was installed on a new equipment. One durable metal part is included. A wrench will be needed to secure or remove this hardware.

This shredder screen is a genuine OEM part made for use with various makes and models of woodchippers. This screen is designed to prevent larger pieces from coming out of the chute of your woodchipper by acting as a barrier until those pieces are small enough. So, if you notice larger chips coming out, it is a sign that the screen is brok...Read moreen or damaged, and needs replacement. This screen measures approximately 9-inches in length and 3.75-inches in width. Made of high-quality metal, this screen is sold as an individual part and does not include the hardware necessary to secure it within your equipment. Reference your user manual for exact placement and installation of this screen.

This is a genuine item that is supplied by the original equipment manufacturer for use with MTD, Troy-Bilt and Yard Machines chipper-shredders. It is an identical replacement for a missing or a faulty pin that helps to secure the #911-0833B Pin-Clevis<...Read more/a> that is sold separately. Keep in mind this high-quality part is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.

Read less

The Push Cap Rod is a 1/2-inch metal metal cap which can be easily installed with a hammer and pliers. This manufacturer certified part comes in silver and is made of metal. This cap attaches onto an axle to help the wheel stay attached. If broken, the wheel will fall off and the part should be replaced.

The washer attaches to the double pulley. It is made of metal and is sold individually. This is a genuine MTD, Troy-Bilt, Yard Man, and Cub Cadet part sourced directly from the manufacturer for use in tillers, edgers, chippers, and lawn mowers. A wrench might be required during the replacement of this part. It may become broken and will need to be replaced.