My Orders
- Home
- 12A-264U011
- Instructions
12A-264U011 (2009) Troy-Bilt Lawn Mower - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Not the exact fit
3 of 5 people
found this instruction helpful.
-
Jay from GERRY, NY
- A Bit Difficult
- 30 - 60 mins
I had to drill and tap the ends of the axle and put a 1/4” bolt in to fasten the wheels. The hubs were not the same. They fastened differently.
Was this helpful?
Thank you for voting!
Front drive wheels were wore out
2 of 5 people
found this instruction helpful.
-
Ronald from WAYNE, MI
- Very Easy
- Less than 15 mins
-
Socket set
Unbolted old wheels and bolted new wheels to my lawn mower
Was this helpful?
Thank you for voting!
The treads on the front drive wheels were worn down to the point that they provided little traction.
3 of 10 people
found this instruction helpful.
-
MICHAEL from Kennewick, WA
- Really Easy
- Less than 15 mins
-
Socket set
Removed a single nut on each end of the drive shaft with the appropriate socket. Wheels then slipped off. Cleaned/polished the shaft with fine sandpaper, lubed with silicone spray, slid on the wheels and reinstalled the nuts with the same socket. Wheels were an exact fit and OEM quality. Done in 15 minutes start to finish.
Was this helpful?
Thank you for voting!