12995 (000001) Ariens Lawn Tractor - Parts

For Models 57

This replacement part is used to connect the mower blade to the base of the mower deck. It is made of metal, is gold, is not part of a kit or assembly, and is sold individually. The Bearing Slinger is most often located on the spindle housing of the mower deck and needs to be replaced if it is broken, worn, or damaged. This part is know...Read moren to become worn through regular use of your machine. Customers rated this repair as Medium difficulty.

This silver metal Ball Bearing is used to reduce the friction between rotating parts and allowing for even weight distribution. This part will require a screwdriver, pliers, socket set, wrench set and nut driver. Its installation is rated as "Easy". An installation tip: ball bearings should be tapped into place. If broken or worn down, yo...Read moreu will hear a grinding, growling, screeching, or rumbling sound, and the part should be replaced. Bearings should spin freely with no noise. If the spin is rough, makes a noise, or the balls are discolored, this means they are too worn and should also be replaced. This part requires a bearing puller. Refer to your make, model and diagram to check if this is the right part.

This authentic replacement part is designed for use with Ariens snowblowers. Ball bearings are generally utilized to reduce the friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over time it will wear out ...Read moreand it may begin to fail eventually requiring a replacement. Keep in mind this high-quality component is made of durable metal and is sold individually. Please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware.

This is a genuine manufacturer-approved component which is designed for Ariens snowblowers. It is an identical replacement for a missing or a damaged idler that was installed on a new unit. This part supports the belt and it helps to drive the unit. Refer to the owner's manual and the appropriate diagrams of your model to ensure the corre...Read morect repair procedure. Note, this high-quality idler is made of a durable metal and is sold individually. A wrench set will be needed to perform this repair.

This authentic OEM sourced component is specially made for use with Ariens lawn and garden equipment. Ball bearings are generally utilized to reduce friction between rotating parts. The balls or rollers take the load and spin, distributing the weight evenly while the minimal contact area of the ball reduces friction. Unfortunately, over t...Read moreime due to heat, pressure and friction bearings tend to wear out and may begin to fail eventually requiring a replacement. Keep in mind this high-quality item is made of durable metal and is sold individually.

This is an authentic Ariens replacement part, sourced from the original manufacturer for use with riding lawnmowers. The special hex nut is used with a variety of different lawnmowers and the application of the nut can vary based on the model of mower. This jam nut is available as an individual replacement part.

This is an original part from the Ariens manufacturer. The cotter pin (1/8 x 1 plated) is made of durable metal, and is compatible with many snowblower machines. This component is often used to secure the chute crank. The cotter pin is sold individually. Please be sure to refer to specific manual and diagrams for repair instructions. A screwdriver may be helpful in making the replacement.