128LD Husqvarna - Parts

This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filt...Read moreer is built to meet original equipment standards for fit and function. Over time, the filter may become clogged, restricting fuel flow and making engine starts more difficult. For optimal performance, it should be replaced—not cleaned—at the first sign of blockage or wear.

This Fuel Line is a 25-inch, clear, plastic line used to deliver fuel. It requires a screwdriver, pliers, socket set, and nut driver and is rated as "Easy" to install by customers. If the fuel line wear out to the point of breaking, cracks and/or leaking will appear and the part should be replaced. Refer to your make, model and diagram to ensure this is the correct part for you.

The air filter prevents dirt and debris from entering the engine on your lawn equipment. This is an OEM filter that is white, roughly 2x3.5 inches in dimension, and can only be purchased individually. Made of foam, the air filter becomes clogged and worn over time, causing the engine to run rough from restricted air flow. You can make t...Read morehis repair easily with no required tools by inserting the new filter inside the air cleaner housing of your engine.

The Fuel Line Fitting is a plastic part which attaches two pieces of fuel line together. If broken due to damage/fatigue, there may be a leak and the part must be replaced. Installation is rated as "Easy". Refer to your make, model and diagram to ensure this part is correct for you.

This replacement throttle housing is specially designed for use with Husqvarna trimmers and edgers. It is an authentic OEM sourced part, not an aftermarket imitation. This is the left hand side plastic housing piece only. Please note, the right hand side housing piece and the hardware to secure the two pieces together are all sold separately. To complete this repair you will need a screwdriver.

This replacement throttle housing is a high quality OEM item that is specially designed for Husqvarna string trimmers and edgers. This is the right hand side plastic housing piece, please note that the left hand side piece and the hardware to secure the two halves are all sold separately. To complete this repair you will need a screwdriver.

This carburetor mixes air and fuel to power small engines, helping ensure smooth starting and reliable performance. Built from durable materials, it supports consistent fuel delivery and efficient operation. Replacing a worn or faulty carburetor can resolve issues such as hard starting, rough idling, or poor acceleration, restoring proper engine function.

This Chain Bar Adjuster kit is a kit which contains all necessary hardware for adjusting a chain bar on a chain saw. Installation is rated as "Easy" and requires a screwdriver, wrench set and socket set. This part comes directly from the manufacturer.

This is an OEM part guaranteed to fit Milwaukee power tools. This trigger spring is attached to main trigger. Please note that only trigger spring is included. When disassembling this area, be sure to slowly separate parts in order to prevent springs from being lost when released too quickly. Though they appear similar, a lockout spring i...Read mores a different part used with the throttle lockout (not present in all models). This part is often purchased with: • Trigger, part # 545066001 • Throttle Lockout, part # 530059804 • Lockout Spring, part # 545045601

The OEM Mounting Bar Nut is a nut used to install a mounting bar to your machine. Installation requires a wrench set and socket set, and is rated as "Easy". This nut attaches to the chainbar studs.

This replacement knob is used to secure the air filter cover. It is an authentic Husqvarna part sourced directly from original equipment manufacturer. It is commonly used on gas powered trimmers, edgers and blowers. This assembly consists of a plastic knob/handle and a threaded metal shaft. This item is sold individually.

This purge bulb is an authentic OEM part from Craftsman for gas blowers, trimmers, blowers and weed wackers. This part disperses fuel to the carburetor to provide starting the blower faster. You will need a screw driver to replace this part. This purge bulb is made of rubber and sold individually.