1280M Simplicity Snow Blower - Parts

This is a genuine item that is supplied directly from the original equipment manufacturer for use with Murray, Snapper and Simplicity lawn and garden equipment. It is an identical replacement for a missing or damaged hold down that was originally installed on a new unit, please make sure to check the appropriate diagrams of your model for...Read more the correct location and application of this hardware. Keep in mind this high-quality component is made of durable black plastic and is sold individually.

The stop switch is made of plastic and metal and helps to turn off the device. This is an authentic replacement part that is sourced from the original manufacturer for use with engines, generators, snowthrowers, and blower-vacuums made by Toro, Murray, and Briggs & Stratton. This part is available individually. During the installation pro...Read morecess, a wrench set and wire stripping pliers might be needed to replace this part. It may become bent or broken and will need to be replaced.

This engine ring set is a genuine OEM replacement designed for small engine applications. It helps seal the cylinder properly to maintain compression, reduce oil consumption, and restore smooth, efficient engine operation. Ideal for engine rebuilds or repairs, this ring set should be replaced when wear causes power loss, excessive oil use, or reduced overall performance.

This Spring is used to hold down the chute. It's rated as "Easy" to use, and requires a wrench or socket. The part comes in gold metal. If worn, damaged broken, or missing, it should be replaced. Refer to your make, model and diagrams to check if this is the correct part for you.

The Oil Seal is used to seal the gear case where the axle extends from the case, around the axle shaft. It's rated as "Easy" to install, and will require a wrench set and seal puller. When installing, use something big enough to make contact with the entire seal, such as a PVC pipe, and tap gently into place. If broken, you will see oil ...Read moreleaking, and the part must be replaced. This gray, rubber part is sold individually. Refer to your make, model and diagrams to ensure this is the correct part for you.

This 5/8 Washer is an OEM part that spreads load under a bolt or nut in a variety of different lawn equipment. This washer has an inside diameter of 0.625 inches, or 5/8. It is silver in color, made of metal, and sold individually. Over time, the washer may become damaged due to fatigue, and need to be replaced. Depending on the locatio...Read moren of the bolt or nut it is associated with, this repair may vary in difficulty, but generally it should be easy and not require any special tools.

This part is an OEM from Briggs & Stratton. The air cleaner gasket is constructed of a cardboard composite, and is designed for use with many lawn and garden engines. The gasket is often fitted in the carburetor, providing protection from friction and leakage. A screwdriver, pliers and a socket set are helpful with making the replacement....Read more The air cleaner gasket is sold individually. This item is also included in the (nikki carburetor) carburetor kit overhaul (696146).

This is an authentic OEM component from Toro. The float bowl gasket is made for use with many lawn and garden engines. The flexible plastic gasket is fitted in the carburetor, securing and protecting the float bowl components from dust and leakage. A screwdriver, socket and wrench set are necessary for the installation. The float bowl gasket is sold individually.

This is an authentic Kawasaki part which is specially manufactured for use with small engines commonly installed on a variety of lawn and garden equipment. The exhaust valve is used to expel exhaust gases from the engine after fuel is fired in the cylinder. It is an identical replacement for a damaged or a missing component that was insta...Read morelled on a new unit. This exhaust valve is sold as an individual item. Please see the model diagrams to ensure the proper repair procedure.

This is a genuine OEM sourced rebuild kit designed for use with Briggs and Stratton engines. This kit contains all the necessary gaskets, diaphragms and other parts to rebuild your carburetor. It helps to fix common problems associated with worn out gaskets or diaphragms, including leaks and sluggish performance and other carburetor relat...Read moreed issues. Includes: float bowl gasket; pin-float hinge; kit-idle speed; valve-float needle; gasket-intake; gasket-intake; plug-welch; gasket-air cleaner; seal-choke; throttle shaft Replacing these items you would need a screwdriver and pliers.

This is a genuine OEM supplied replacement part that is specially designed for Briggs and Stratton engines that are commonly installed on lawn and garden equipment. It is the part that the piston is attached to. The piston is a central component of a two-cycle engine, it provides both the compression within the engine and it transfers the...Read more energy from combustion to the crankshaft which creates rotation. Please note this high-quality rod-connecting is made of durable metal and is sold individually.

This is an authentic Murray replacement part that has been sourced from the original manufacturer to be used with snowthrowers. The bearing flange attaches to the side of the auger housing and is used to support the auger shaft. This item is sold as an individual replacement part.