- Home
- 124K02-0679-B1
- Instructions
124K02-0679-B1 Briggs and Stratton Engine - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Mower was submerged in Hurricane Matthew
25 of 51 people
found this instruction helpful.
-
Morris from HOPE MILLS, NC
- A Bit Difficult
- More than 2 hours
-
Wrench set
Total disassemble, clean out water and any rust. hone cylinder, wire brush where needed,reassemble with new rings,gaskets and seals and lucas oil product. Started on second pull. Mowed lawn. If you have never done this sort of work before, probably should not attempt.
Other Parts Used:
Was this helpful?
Thank you for voting!
Mower body was die cast and in good condition. Engine was burning oil.
5 of 8 people
found this instruction helpful.
-
Robert from TEGA CAY, SC
- Really Easy
- More than 2 hours
Removed engine, no specialty tools required. Honed the cylinder, and lapped the valves. Tip on compressing valve spring for reassembly; compress springs with you finger and tie them with 2 zip ties, cut the zip ties after installing the keepers. Repainted the mower deck and engine. It runs and looks like new. My Toro is a 1999 model .
Other Parts Used:
Was this helpful?
Thank you for voting!
Leaking gaskets
4 of 12 people
found this instruction helpful.
-
Dustin from BANGOR, ME
- A Bit Difficult
- More than 2 hours
-
Socket set, Wrench set
All the gaskets needed to be replaced on the Briggs 6.75 flathead I was rebuilding. I ported and polished the ports and shaved the eyebrow between the valves and the piston. The gasket set was a perfect fit. It is a monster now. It doesn't sound like a lawnmower engine anymore
Was this helpful?
Thank you for voting!