1208 - Parts

This is a genuine OEM sourced part that is intended to be used with tillers from Troy-Bilt, Yard Machines, MTD, and Cub Cadet. The oil seal is used to prevent leaks between the drive shaft and the transmission case assembly. This item is available as an individual replacement part.

These keys are authentic OEM replacement parts. They are compatible with over 150 models of machines such as snow throwers and lawn tractors. These keys are used to start the machine. You will not be able to operate the machine without one of the keys. A replacement is needed if the old key is lost or worn. These keys are made of metal and are sold as a pair.

This is an oil seal for various models of tillers and cultivators, designed to be installed directly onto the wheel shaft or axle of the transmission. The primary purpose of this oil seal is to prevent oil from leaking out of the tiller transmission and gear assembly while also preventing contaminants from entering the transmission, which...Read more can lead to disruptions, part wear, and reduced efficiency. If you observe visible oil leaks, excess grease, lubricant accumulation, or experience difficulty in rotating the wheels, it is likely that the oil seal has become damaged and requires replacement. This oil seal is sold individually, but it is advisable to replace both seals simultaneously, so consider ordering multiples if needed. The process of replacing this seal involves several tools and materials, including a jack, socket set, wrenches, drill, pry bar, screws, new transmission fluid or lubricant for the seal, sandpaper, and a rubber mallet or hammer. It is essential to consult the instruction manual for your specific tiller model to ensure the proper disassembly of the axle. To begin the replacement, gain access to the oil seal on the axle, which may require removing the wheels and wheel hub. Utilize a pry bar to carefully remove the old oil seal, taking care not to damage the transmission or axle. Clean the area around the seal and shaft with sandpaper to remove any grit, dirt, or debris that could lead to contamination. Lubricate the new oil seal and install it using an object with the same circumference, such as PVC pipe, to ensure it is flush and aligned within the housing. Finally, reinstall the axle assembly and any other components that were previously disconnected, including wheels and wheel hubs.

This is a genuine replacement part that has been sourced from the original manufacturer to be used with tillers from Troy-Bilt and MTD. The cable connects to the tiller's handle and is used to actuate the throttle valve on the carburetor to adjust the engine's fuel intake. This item is available as an individual replacement part.