EasyApplianceParts is now PartSelect! We've merged our sites to provide a better shopping experience for you.   Full Details
✖

Find Parts

Parts Departments

Top Model Types

Top Brands

Repair Help

Expert Repair Videos

Keep typing for more specific results...

11B-B24A059 MTD Lawn Mower - Instructions

All Instructions for the 11B-B24A059
1 - 7 of 7

Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!

Search filter:
Clear Filter
Your search term must have 3 or more characters.
Bag will not stay in placed when mower is running.
3 of 6 people found this instruction helpful.
  • Peter from San Diego, CA
  • Very Difficult
  • More than 2 hours
Repair was not effective. I used once and the bag keep getting off or blown out of the mower.
Was this helpful?
Thank you for voting!
Replaced existing grass bag
3 of 8 people found this instruction helpful.
  • Mark from PHOENIX, AZ
  • Easy
  • 15 - 30 mins
  • Pliers
The bag was slightly larger than the original. So the clips along all sides needed to be trimmed slightly to fit the existing frame. 15 minute fix and it works perfect.
Was this helpful?
Thank you for voting!
Motor built by Honda ran perfectly...deck was totally rusted and rotten
1 of 3 people found this instruction helpful.
  • Mike from NORFOLK, VA
  • Easy
  • 30 - 60 mins
  • Pliers, Screw drivers, Socket set
Removed front wheel assembly (5 screws) Removed rear wheel/handle assembly (3 screws and disconnect control cable with pliers), removed blade (1 bolt)...transferred all to new deck with new screws and washers (deck screws are easy to remove and replace as they screw into plastic)...Before installing blade I sprayed under deck with truck u ndercoating spray to help prevent rust)....entire process took about an hour and now I have a like-new mower. Note that Honda stopped making this motor this year, so it's very much worth saving.
Was this helpful?
Thank you for voting!
Broken adjustment lever
2 of 7 people found this instruction helpful.
  • Tim from SPOKANE VLY, WA
  • A Bit Difficult
  • 30 - 60 mins
  • Screw drivers
Placed on stands to hold mower up, then removed wheels and clips, then placed new axle in place and replaced clips and wheels.
Was this helpful?
Thank you for voting!
All Instructions for the 11B-B24A059
1 - 7 of 7