- Home
- 1197728310
- Instructions
1197728310 Kenmore Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
oven door hinges were worn out.
4 of 10 people
found this instruction helpful.
-
Gilbert from Claymont, DE
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the storage drawer to access the door springs.Removed the worn hinges and installed the new hinges,connected the springs. Removed the oven door before anything else was done.The could not have been any simpler .
Other Parts Used:
Was this helpful?
Thank you for voting!
right hinge on oven door broke. door would no longer shut, losing much heat.
1 person
found this instruction helpful.
-
Donna from ROANOKE, WV
- Easy
- 30 - 60 mins
-
Pliers, Screw drivers
Remove drawer, remove oven door, remove hinge and pieces. Get the spring loose. Attache new hinge to frame, reconnect spring. Slide door back on hinges.
Was this helpful?
Thank you for voting!
Bad water filter
1 person
found this instruction helpful.
-
Robert from CARSON CITY, NV
- Very Easy
- Less than 15 mins
Push release button, pull out filter cartridge . Replace with new cartridge.
Was this helpful?
Thank you for voting!
filter just needed to be changed.
1 person
found this instruction helpful.
-
Olga from ALEXANDRIA, IN
- Very Easy
- Less than 15 mins
I pushed the button on the filter holder to release the filter by pushing it out of the holder pulled it out all the way and put the new one in. The whole prosses took five seconds.
Was this helpful?
Thank you for voting!
replace old filter
1 person
found this instruction helpful.
-
Michael from FRANKLINTON, NC
- Easy
- Less than 15 mins
simple replacement
Was this helpful?
Thank you for voting!
Slow water output
1 person
found this instruction helpful.
-
Frank from HOWELL, NJ
- Very Easy
- Less than 15 mins
Followed easy instructions
Was this helpful?
Thank you for voting!
H20 filter showing red light
1 of 2 people
found this instruction helpful.
-
Peter from East Hampton, NY
- Really Easy
- More than 2 hours
Had to hold the new filter element cartridge whilst wrestling the refrigerator into place. Whew!
Was this helpful?
Thank you for voting!
needed new filter
1 of 2 people
found this instruction helpful.
-
William from Fortlauderdale, FL
- Really Easy
- Less than 15 mins
took outthr old one and put in the new one
Was this helpful?
Thank you for voting!
Broken hinge
2 of 5 people
found this instruction helpful.
-
MICHAEL from MAY'S LANDING, NJ
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
Replaced same very simple.
Was this helpful?
Thank you for voting!
time to change water filter
2 of 6 people
found this instruction helpful.
-
Ronald from Warrensburg, MO
- Really Easy
- 30 - 60 mins
first, there many different water filters. your experience will be different according to your water filter type.
Was this helpful?
Thank you for voting!
Replaced Filter
1 of 3 people
found this instruction helpful.
-
Dennis from Crossville, TN
- Really Easy
- Less than 15 mins
Replaced water filler. Easy
Was this helpful?
Thank you for voting!
Needed to replace water filter
1 of 3 people
found this instruction helpful.
-
Bobbi from Irvine, CA
- Really Easy
- Less than 15 mins
It is very easy..........push button on the exissting filter. It removes easly, then insert new one. Remember to run the water for 3 minutes before next use. It took about 5 minutes.
Was this helpful?
Thank you for voting!
water filter needed changed
0 of 1 people
found this instruction helpful.
-
Joanna from Lock Haven, PA
- Really Easy
- Less than 15 mins
Removed old filter...put in new...ran water for three minutes before drinking. Easiest repair/replacement job ever!!!
Was this helpful?
Thank you for voting!
Time to replace filter.
0 of 1 people
found this instruction helpful.
-
Kay from Port Hueneme, CA
- Really Easy
- Less than 15 mins
I took out the old filter and put in the new filter. I ran some water through it and it was done.
Was this helpful?
Thank you for voting!
Red light came on, needed a new one
0 of 1 people
found this instruction helpful.
-
Joseph from Virginia Beach, VA
- Really Easy
- Less than 15 mins
-
Screw drivers
Removed the old, installed the new one and finally figure out we had to press the reset button.
Was this helpful?
Thank you for voting!