- Home
- 1197728310
- Instructions
1197728310 Kenmore Wall Oven - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
yearly maintenance
623 of 666 people
found this instruction helpful.
-
Antonio from Folsom, CA
- Really Easy
- Less than 15 mins
swap filter
Was this helpful?
Thank you for voting!
water leaking(pouring) from the filter into the refrigerator
89 of 101 people
found this instruction helpful.
-
Michele from Red Oak, TX
- Really Easy
- Less than 15 mins
Pushed the button on the filter in the fridge, the cartridge popped out and in with the new. That simple. Prior to replacement the water was leaking, although it was still producing water and ice through the door. When the filter was out, no leaks, but no water and ice! Just needed a new filter.
Was this helpful?
Thank you for voting!
Interior light was on "red" indicating a water filter change was needed.
21 of 23 people
found this instruction helpful.
-
Tom from Simpsonville, SC
- Really Easy
- Less than 15 mins
Just pushed the button along side the filter and it popped out in my hand. I unpacked the new filter module and inserted it. It was necessary to run water through the dispenser for a couple of minutes to purge the air and clear the lines. The modular filter assembly is more expenseve than some but the ease of replacement makes the cost a
... Read more
good value.
Read less
Was this helpful?
Thank you for voting!
Filter neeed replacement
20 of 24 people
found this instruction helpful.
-
Nancy from Lawrenceville, NJ
- Really Easy
- Less than 15 mins
Just opened the filter storage and popped out the old one and put in the new one. Ran the system for three minutes according to directions and it worked fine.
Was this helpful?
Thank you for voting!
Water filter needed replacement
20 of 26 people
found this instruction helpful.
-
Glenn from Simi Valley, CA
- Really Easy
- Less than 15 mins
Once I recieved the new filter, I enthusiastically opened the box, removed the filter from it's packaging and set it aside for quick access. I opened the refrigerator door, pushed the release button on the old filter and pulled it out. I then tossed the old filter in the trash.
Once that was done, I removed the 2 rubber caps covering ... Read more the inlet and outlets on the new filter. Then, with ace precision, I guided the new filter back into the slot until it clicked. I ran the water for 3 minutes as the instructions suggested, then, had a glass of water.
Mission accomplished and it went off without a single hitch!
Glenn Walker, Simi Valley, Ca
Once that was done, I removed the 2 rubber caps covering ... Read more the inlet and outlets on the new filter. Then, with ace precision, I guided the new filter back into the slot until it clicked. I ran the water for 3 minutes as the instructions suggested, then, had a glass of water.
Mission accomplished and it went off without a single hitch!
Glenn Walker, Simi Valley, Ca
Read less
Was this helpful?
Thank you for voting!
needed to replace filter
11 of 17 people
found this instruction helpful.
-
Wayne from Homosassa, FL
- Really Easy
- Less than 15 mins
push in old filter, turned to the left and filter came out. Pushed in new filter and it clicked into place. Very easy to do.
Was this helpful?
Thank you for voting!
Ice/water filter needs replacement after 7 months
10 of 14 people
found this instruction helpful.
-
Paulo from Round Lake, IL
- Really Easy
- Less than 15 mins
I just took the old filter off and replaced with the new one, after I run the water for about 15 minutes and tossed the old ice and cleaned the tray.
Was this helpful?
Thank you for voting!
Springs pooped off door hinges, causing hinges to break through door face
13 of 23 people
found this instruction helpful.
-
Xavier from Rocky Point, NY
- A Bit Difficult
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Remove decorative side panels on stove to expose backside of hinge and springs;
remove door;
remove old hardware;
since hinge openings were bent, straighten hinge opening in oven face;
attach spring to inside of oven;
slide hinge through opening;
attach spring to hinge;
screw hinges to oven face;
re ... Read more peat on other side;
attach hinges to door;
while decorative panels are off, vacuum
install decorative panels.
DONE.
remove door;
remove old hardware;
since hinge openings were bent, straighten hinge opening in oven face;
attach spring to inside of oven;
slide hinge through opening;
attach spring to hinge;
screw hinges to oven face;
re ... Read more peat on other side;
attach hinges to door;
while decorative panels are off, vacuum
install decorative panels.
DONE.
Read less
Other Parts Used:
Was this helpful?
Thank you for voting!
Ice maker and water were not working.
9 of 12 people
found this instruction helpful.
-
Carolyn D from Rescue, CA
- Really Easy
- Less than 15 mins
Ordered new water filter. It arrived, I opened it and took out the old one and put in the new one. I worked perfectly
as soon as I realized I had to remove the protective caps.
as soon as I realized I had to remove the protective caps.
Was this helpful?
Thank you for voting!
water filter
9 of 12 people
found this instruction helpful.
-
MIKE from MELBOURNE, KY
- Really Easy
- Less than 15 mins
pushed release button removed filter, installed new filter
Was this helpful?
Thank you for voting!
Replaced the water filter
6 of 6 people
found this instruction helpful.
-
Gaylan from ALEDO, TX
- Very Easy
- Less than 15 mins
Removed the previous water filter. Installed the new water filter.
I then filled a large glass full of water from the water dispenser several times to clear the air from the filter and lines.
Time to install, less than 8 minutes.
Thank you Parts Select!
I then filled a large glass full of water from the water dispenser several times to clear the air from the filter and lines.
Time to install, less than 8 minutes.
Thank you Parts Select!
Was this helpful?
Thank you for voting!
water stopped dispensing
3 of 4 people
found this instruction helpful.
-
Karen from Swanssea, MA
- Really Easy
- Less than 15 mins
I was 3 months overdue to change the filter and it stopped working. I ordered the part put it in reset the light and let the water run until the pressure was consistent and the water was running clear. So easy to do. Lesson learned replace the filter when you are supposed to!
Was this helpful?
Thank you for voting!
Our Pure Source 2 Ice&Water Filter had not been changed in over a year when we bought this home.
2 of 2 people
found this instruction helpful.
-
Bette from Arlington, TX
- Really Easy
- Less than 15 mins
We just removed the old filter and installed the new one. Very simple. We are very pleased. Also the filter arrived at our home the day after I placed the order!! Even more reason to be very pleased.
Was this helpful?
Thank you for voting!
Both hinges on the oven door were broken , door would not close or open easily
2 of 2 people
found this instruction helpful.
-
John from GALVESTON, TX
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
I watched a you tube video from the reference library at reference oven door repairs and the explanation was clear and simply understood , even though the oven type was not exact, very easy to follow.
Other Parts Used:
Was this helpful?
Thank you for voting!
broken right side hinge
2 of 2 people
found this instruction helpful.
-
boutros from NORTHRIDGE, CA
- Really Easy
- 15 - 30 mins
-
Pliers, Screw drivers
remove the bottom storage door unhook 2 return spring check with flash light install support under the top cook door and open the top door slowly , remove 3 screws at the bracket slide out the hinge with springs and slide out the hinge from the door install the 2 springs the same way you take it out and reinstall bracket and screws and s
... Read more
prings and your done just picture and remember the you remove and reinstall i did it and i'm not a handy man i got happy when i did it my self i said wow to my self if i called some repair guy he possible wil charge me at least $ 125 to $ 150 for 25 min job
Read less
Was this helpful?
Thank you for voting!