My Orders
1157403 Troy-Bilt Trimmer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Fuel line broke
13 of 16 people
found this instruction helpful.
-
Erik from ROBERTSDALE, AL
- Really Easy
- 15 - 30 mins
-
Screw drivers
Removed the two screws holding the fuel tank to the main unit. Removed the two fuel lines and any stuck on rubber. Installed and installed two screws to mount the new tank. Slid fuel lines on their respective connectors. Done.
Was this helpful?
Thank you for voting!
Top drive shaft on my craftsman wc2200 grass trimmer broke
3 of 7 people
found this instruction helpful.
-
Thomas from TICKFAW, LA
- Really Easy
- 30 - 60 mins
-
Screw drivers
Drive shaft replacement was very easy . Minimal tools were required. Just disconnect the throttle cable, mainly for easier movement of trigger handle. Then remove the guide handle and the trigger mechanism and base. Reassemble reverse order.
Was this helpful?
Thank you for voting!
Super Easy Install
3 of 7 people
found this instruction helpful.
-
Michael from GLENN HEIGHTS, TX
- Really Easy
- Less than 15 mins
-
Screw drivers
The fuel tank is held in place by 2 screws. Simply take the screws off and pull off the fuel lines.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Take the new fuel tank. Put it in place and screw the 2 screws in to hold the fuel tank.
Connect the fuel lines and you're done.
This is the easiest repair I have ever done on any of my lawn equipment.
Was this helpful?
Thank you for voting!