My Orders
- Home
- 1106605901
- Instructions
1106605901 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Had issues with removing the inner tub
-
Bruce from Yankton, SD
- A Bit Difficult
- 1- 2 hours
-
Pliers, Screw drivers, Socket set
Had a lot of corrosion on the shaft area and had a hard time removing the inner tub but after some WD-40 and unprintable words and labor it popped off. Cleaned everything up, shaft, inner drum and outer drum. After that everything was a piece of cake. Thanks for the help!
Was this helpful?
Thank you for voting!
Missing lid hinge bearing
-
Kim from Oviedo, FL
- Really Easy
- 15 - 30 mins
-
Screw drivers
1) Using a Phillips head screwdriver, the two screws retaining the hinge pin to the lid were removed. 2) Remove hinge pin and tilt lid slightly to gain access to bushing hole. 3)Install new bushing in hole. 4)Reposition lid. Insert hinge pin through lid an
... Read more
d into bushing. 5)Reinstall hinge pin retaining screws and tighten.
Read less
Was this helpful?
Thank you for voting!