- Home
- 1106008716
- Instructions
1106008716 Kenmore Dryer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
Old Part Broke Off
0 of 2 people
found this instruction helpful.
-
Steve from Edina, MN
- Really Easy
- Less than 15 mins
Took 5 seconds, just snapped in the slot, didn't need any tools.
Was this helpful?
Thank you for voting!
Dryer would not start
0 of 2 people
found this instruction helpful.
-
Edwin from Shelby, NC
- Easy
- Less than 15 mins
-
Screw drivers
Took top of d then dryer loose then replaced switch actuator put dryer top back in place. Not that hard.
Was this helpful?
Thank you for voting!
The dryer would not run.
0 of 2 people
found this instruction helpful.
-
Kevin from North Aurora, IL
- Really Easy
- Less than 15 mins
-
Screw drivers
I first noticed that the tab of the door switch snapped off so the safety on/off switch did not work when the door was closed. I temporarily taped the switch closed so I could use the dryer. I found the model number from the unit and easily found the schematic and part description from the website. I placed the order and had the part in
... Read more
a few days. Problem solved. Thank you
Read less
Was this helpful?
Thank you for voting!
Bulb Replacement
0 of 2 people
found this instruction helpful.
-
Judith from Phoenix, AZ
- Really Easy
- Less than 15 mins
I pulled down the wire around the glass cover. . . Released on end of the wire from its holder being careful to not let the glass cover drop. Unscrewed the bulb and replaced with replacement. Easy, easy.
Was this helpful?
Thank you for voting!
door latch/ catch completely shattered
0 of 3 people
found this instruction helpful.
-
Edward from Lowell, MA
- Really Easy
- Less than 15 mins
-
Screw drivers
Snapped latch into existing hole in 2 seconds. The pin that goes into latch was still intact. That's it ,real simple. The only problem I will hopefully not have in the future is the the mico-switch which is just hanging in there, the switch works but the lever that extends out from the face, that works with the door is partially broken of
... Read more
f and the switch is no longer available on your parts list. The appliance is twenty-one years old. I am very happy with your service and I received the parts the next day, after I ordered them and I will be buying more parts in the months to come. This time it will be for my Kenmore gas stove and then a Kenmore refrigerator door hinge.
Read less
Was this helpful?
Thank you for voting!
dry door latch broke
-
George from Melbourne, FL
- Really Easy
- Less than 15 mins
-
Pliers
I watched the online video first, which made the removal and installation fast and easy.
Was this helpful?
Thank you for voting!
dryer door switch broke
-
Jeff from Mamaroneck, NY
- Really Easy
- Less than 15 mins
-
Screw drivers
I went to internet & got the part & instructions.the shipping cost more than the part. Saved 20.00 & gas.
Was this helpful?
Thank you for voting!
door would not close catch fell within the door
-
Richard from Marmora, NJ
- Really Easy
- Less than 15 mins
Pushed the new catch in by hand. Working great.
Was this helpful?
Thank you for voting!
Dryer door would not stay shut
-
Jerry from Yankton, SD
- Really Easy
- Less than 15 mins
Got the latch kit, found the correct one, popped it in...dryer works! Thanks....
Was this helpful?
Thank you for voting!
door would no longer catch when shut
-
Leah from Philadelphia, PA
- Really Easy
- Less than 15 mins
-
Screw drivers
Having read the instructions and watched the tape, I pried out the remaining catch with a flat screwdriver, read about what the color scheme on the parts wasbout and pushed in the correct part. Voila ! Done in probably two minutes.(By an 82 year old woman!)
Was this helpful?
Thank you for voting!
door would open during drying cycle and shut off machine
-
Robert from Rochester, NY
- Really Easy
- Less than 15 mins
Got online with parts select, easily found the parts needed and ordered them. They arrived very quickly. The repair itself took all of 5 minutes and now the dryer door stays shut like it is supposed to. Only complaint is shipping was more than the parts but then again, I didn't waste a lot of time running all over town looking for what I
... Read more
needed. So, in the long run I saved money , especially when compared to a calling someone else to fix it.(big bucks for even the most minor service call as you all know).
Read less
Was this helpful?
Thank you for voting!
door kept pooping open, clothes took forever to dry. Lot of wasted time and energy and money. Wish we would have reapired a long time ago.
-
William from Murrieta, CA
- Really Easy
- Less than 15 mins
-
Pliers
pop off put in done
Was this helpful?
Thank you for voting!
dryer door kept popping open
-
vangelis from rosemead, CA
- Really Easy
- Less than 15 mins
-
Pliers, Screw drivers
following the repair video made it super easy. thanks!
Was this helpful?
Thank you for voting!
Door latch mechanism broke and fell into door
-
Peter from POTTSTOWN, PA
- Really Easy
- Less than 15 mins
Step 1: remove new latch from bag in which part comes. Step 2: push latch into hole where the other latch was. Step 3: enjoy having a dryer you dont have to hold closed with a folding chair.
Was this helpful?
Thank you for voting!
Light bulb failure
-
Grant from Alexandria, VA
- Really Easy
- Less than 15 mins
Received the part the day after ordering. Appreciated the quick service and repair took less than a minute.
Was this helpful?
Thank you for voting!