1104812791 Kenmore Washer - Instructions

First I removed hose from drain, next I loosened the clamp at the drain hose connection at the washer. Removed hose. Have rags/towels as there is some residual water that will spill out of the washer. Reinstall in reverse.

This product comes in a bottle with a brush like Liquid Paper. It goes on incredibly easy. A second coat might be needed. I wanted to prevent rust from setting in so I covered the scratches and dings. The paint is a little brighter since my washer is 10 years old but it still looks great.

First, I read the previous repair stories, so I knew what step to do first. So, first I took the hose off of the drain, then I removed it from the washer. And as the previous repair story stated, some water came out and I had a towel ready to catch the water that was in the hose. I threaded the clamp onto the new hose, pushed the new ho ... Read more se onto the washer, used the pliers to open the clamp to better clamp the hose onto the washer. Then, placed the drain hose into the drain pipe and it was done! Thanks for such a great site!

First opened lid up and took ring cover off tub. Then unscrew 4 back screws and lifted top up. I replaced all 4 straps, so this process is repeated 4 times: with rubber gloved hand, lift metal support stick up, remove white plastic safety lock, insert strap and replace safety plastic lock and metal support stick to original position. Then ... Read more , after removing old strap from tup side, replace the new end. After all 4 all done, push back down ring in position over tub, and screw everything back. The hardest part was holding the metal stick up with the gloved hand (as it was oily and slippery), and using one hand to do the rest, Otherwise, a fast and easy job.

Siphon break kit keeps washing machine from continuing to siphon after rinse/cycle -- like emptying a pool with a hose. Fixed the problem of the tub never filling due to siphon draining out water as it's being put in.

First removed the 4 screws on the back of lid. Then the two screws took the broked switch , replace and put the scres and lid back. Very, very easy, just have to becareful for no broke the bleach hose , and specially the pressure water hose attach to the lid. I'm very,very happy with part select which I serached on google, I first boug ... Read more ht a piece of stove for my friend, and I receive the item no the very next day, and when I oredered for my machine same happen ,on the next day I got my item, which suppose be here between 3 to 5 business day. I found other places with better price, but I don''t change part select, especially forthe fast delivery.

Followed instructions other customers provided for hose installation. Haven't installed agitator dogs yet. Need to watch the video on your web site.

Removed the old hoses and screwed on the new hoses.

Removed broken hose and replaced with new hose. My washer will be 21 years old in January.

1. Need mop, bucket to catch leftover water in machine before you remove old hose. 2. Removed old hose by removing clamp. 3. Dried up any remaining water around fixture before attaching new hose. 4. Slide clamp to bottom of hose before attaching to machine. 5. Attached hose and clamp to machine where old hose was removed from. Make sure c ... Read more lamp is secure. (Please note that clamp that came with the new hose was too big. I used the old one. Worked perfectly). 6. Finally run a little water in you washer, then run out to test tightness and there is no leaks.

replaced missing screw and pad and now machine works perfectly

Pulled washer out from wall removed clamp and old drain hose addnew hose replaced clamp put washer back in plact connected drain to outlet simple operation

It was very easy to install the new parts successfully thanku parts select I will always keep using your business the representative was so helpful and understanding my problem I wish I could remember his name he was outstanding and a 100 thumbs up to him

After removing wash cover by unscrewing the 4 screws at the back, I disconnected the electric by pulling the plug connector, this makes for more room to get at the snubbers. Remove the ring that held the snubbers in place, replaced the 4 snubbers , replaced the ring, making sure the position is correct over the snubbers, replaced the cove ... Read more r. Very easy job

Put pump in the way it came out. Used shield from old punp. New shield supplied did not fit. Too large for this pump. Put out going water hose clamp on plugged in the two wires. Tighten the 3 screws and done