My Orders
- Home
- 11029132412
- Instructions
11029132412 Kenmore Washer - Instructions
Search repair tips from other customers using simple keywords like "replace", "fit", "remove", "inspect". DIY doesn't mean you have to do it alone!
Search filter:
Clear Filter
Your search term must have 3 or more characters.
continually reached FL code
3 of 3 people
found this instruction helpful.
-
Woody from Gordon, GA
- Really Easy
- Less than 15 mins
-
Socket set
Removed Back and top of digit front. removed water intake valve part order new part replacing was a breeze
Was this helpful?
Thank you for voting!
Top panel was rusted above soap drawer
3 of 3 people
found this instruction helpful.
-
Cheryl from ELMIRA, NY
- A Bit Difficult
- More than 2 hours
-
Pliers, Screw drivers, Socket set, Wrench (Adjustable)
My husband watched numerous YouTube videos before tackling it.
Was this helpful?
Thank you for voting!
Washer hoses due for replacement
3 of 5 people
found this instruction helpful.
-
James from PINE MOUNTAIN, GA
- Easy
- 30 - 60 mins
Replaced each hose. Did discover that either hose can be used for hot or cold water lines. No longer required to label hot and cold replacement hoses.
Was this helpful?
Thank you for voting!
broken lid latch
2 of 2 people
found this instruction helpful.
-
James from CLINTON TWP, MI
- Really Easy
- 30 - 60 mins
-
Nutdriver, Pliers, Screw drivers
move washer to get to backside, remove necessary screws and hoses, slid washer top over, replaced lid mechanism.
Was this helpful?
Thank you for voting!
The wash plate cap was broken and had to be replaced.
2 of 3 people
found this instruction helpful.
-
norvin from SOMERSET, NJ
- Very Easy
- Less than 15 mins
-
Screw drivers
I used a small flat head screwdriver inserted into slots just under the cap and pried off the cap. The cap should come off very easy.
Replace with the new cap.
Replace with the new cap.
Was this helpful?
Thank you for voting!
Sides of washer dented out
1 person
found this instruction helpful.
-
Robert from East Northport, NY
- Very Easy
- 30 - 60 mins
-
Nutdriver
Replaced Suspension rods removed 3 screws on back of washer, lifted the top, Removed suspension rods and and replaced all 4 on drum.
Was this helpful?
Thank you for voting!
the impellar mechanism wore out so stopped aggitating
3 of 8 people
found this instruction helpful.
-
Stephanie from INDEPENDENCE, KY
- Really Easy
- 30 - 60 mins
-
Socket set
Popped the cap , used a socket to unscrew the bolt (it was stripped so ended up having to cut off bolt) Took off old impellar and replaced, installed a new bolt, replaced Cap and it was fixed.
Was this helpful?
Thank you for voting!
Replace drain hose
3 of 11 people
found this instruction helpful.
-
Brian from DREXEL HILL, PA
- Easy
- 30 - 60 mins
-
Pliers
At first I had to position the washer so I could get access.. after having it positioned, I figured it out. Getting the clamp fastened, I was done.
Was this helpful?
Thank you for voting!
Both outside door handles turned very beige
23 of 76 people
found this instruction helpful.
-
Howard from Boynton Beach, FL
- Easy
- 30 - 60 mins
-
Nutdriver
Everything worked perfectly---thanks to the suggestion of your call center agent. She suggested that since the replacement door handles were no longer available, I should consider repainting them--it worked like a charm. Please tell her she was a life saver. We rent that house in Fl and my returning tenants had complained about the discol
... Read more
oring refer handles. Thank you
Read less
Was this helpful?
Thank you for voting!